Looking CTIS part aka Hens teeth

[Kemper]

Anyone have a line on these? I'm being told buy distributors that it is "military restricted"? I see 2 on eBay but $22 bucks seems steep.

Spicer PN 6773994

 

[simp5782]

Anyone have a line on these? I'm being told buy distributors that it is "military restricted"? I see 2 on eBay but $22 bucks seems steep.

Spicer PN 6773994

View attachment 809922

The part number you have listed isn't listed for anything spicer. Or even on part target as an equalivelent build part under that number.



This one of the fittings for the CTIS wheel hose into the valve stem elbow?

 

[Kemper]

Here where I found it.

https://www.danaaftermarket.com/spicer-commercial-vehicle/commercial-axle/tire-systems/part/673994-coupling-assembly/673994?catalog=PIMS_NA&partType=PART

Yes it adapts the new ctis valve to the stem in the rim. The ones current on my truck are all one piece.


Sent from my iPhone using Tapatalk

 

[simp5782]

The part number you have listed isn't listed for anything spicer. Or even on part target as an equalivelent build part under that number.



This one of the fittings for the CTIS wheel hose into the valve stem elbow?

Part # is 673994. You had an extra 7 in there


I can get em with 617 available. My cost if $16.23 each before shipping.

@Suprman may have a few laying around

Parker lists nothing in that adapter size in their catalog so they wouldn't be an option.

 

[Kbarnes0]

Isnt it an o ring boss fitting? My local hydraulic shop had them I believe.

 

[Kemper]

Part # is 673994. You had an extra 7 in there


I can get em with 617 available. My cost if $16.23 each before shipping.

@Suprman may have a few laying around

Parker lists nothing in that adapter size in their catalog so they wouldn't be an option.

Can you order me 4?


Sent from my iPhone using Tapatalk

 

[Kemper]

Isnt it an o ring boss fitting? My local hydraulic shop had them I believe.

I checked they don’t have them in metric.


Sent from my iPhone using Tapatalk

 

[simp5782]

Isnt it an o ring boss fitting? My local hydraulic shop had them I believe.

One side is boss one side is tube. Not common