Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
I have recently purchased a mep 903a without a control box and im looking for some to build me one or get the info on how to any help would be greatly participated
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mep 903a
- Thread starter Justin52682
- Start date
Scoobyshep
Well-known member
- 1,090
- 1,400
- 113
- Location
- Florida
what all is missing?
- 192
- 270
- 63
- Location
- Flagstaff, Az
There are two boxes listed on epay right now, one for less than $300. Search for MEP-903.
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
As far as i can tell everything is their but the control box i bought two of them from the local fire department ive found a control box but they want a arm and a leg for it ive seen post of these machinces retro fitted with dynagen controllers
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
Ive seen them one said it was parts only and the other one cost 4 times what i got in two machines ive seen post from bimota saying he makes controll boxs but he hasnt posted anything n a long time was tring to find someone to build me one
Scoobyshep
Well-known member
- 1,090
- 1,400
- 113
- Location
- Florida
Depends on how involved you want to get and whats missing. if its just the controls no big deal, if the regulator is gone its a bit harder
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
Regulator is their only thing i dont have is a control box
- 16,668
- 23,813
- 113
- Location
- Burgkunstadt, Germany
The reason it came without a control panel is because its not supposed to come with a control panel. Its part of a major component. This tunnel gen set goes to several different major components. The TM's would be of help to you, but are not released for the public.
Edit. The TM for this gen set is TM 9-6115-670-14&P It is class A, released to the public. I tried to upload it here, but its too big.
Edit. The TM for this gen set is TM 9-6115-670-14&P It is class A, released to the public. I tried to upload it here, but its too big.
Last edited:
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
I have the TM for it trying to find someone to build me a control box that doesnt cost 1400 or someone that has aready done one help me with it my knowledge on this type of stuff i pretty
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
Limited before i start thus project would like to know as much info on these things as possible
Scoobyshep
Well-known member
- 1,090
- 1,400
- 113
- Location
- Florida
If you can get me your specs and a schematic I could put something together
Sent from my SM-G973U using Tapatalk
Sent from my SM-G973U using Tapatalk
Justin52682
New member
- 7
- 0
- 1
- Location
- Perryville Missouri
justinsharer52682@gmail.com send me your phone number
- 16,668
- 23,813
- 113
- Location
- Burgkunstadt, Germany
Low density item. Not going to be a lot of them.