1009 Rear window stuck in down position

[2AForever]

The handle is engaged moves slightly up and down bout an inch or so, but will not close.
The access panel is off and I’m stumped at how to get the glass outa the way and find/fix the problem.

thx in advance

 

[Valor]

The handle is engaged moves slightly up and down bout an inch or so, but will not close.
The access panel is off and I’m stumped at how to get the glass outa the way and find/fix the problem.

thx in advance

If you can get to the bottom of the glass, I think there are 4 bolts, 2 on each side that hold the glass in. Take those bolts off and then slide the glass out with the tailgate down. Good luck

 

[cucvrus]

Can you reach in and get a tug on the bottom of the sash and get someone else to attempt to crank the window up? I think you have a regulator that has disengaged or has bad teeth in the gears of the regulator. They are easy to work on and replace but keeping them oiled and greased is key to the longevity of them. Also getting the side runs, bottom sash roller guides free of crud, clean and greased and oiled will help a lot. Spraying WD or CRC will have no effect. may as well pour water on the parts. Chassis grease and motor oil go a long way to keep them old antiques moving. Good Luck and Be Safe.

 

[Indyharleyguy]

Sounds like mine has the same problem. I took the cover panel off and found a lever/guide was catching on the piece holding the glass at the bottom of the glass. Tried to bend it back in and only kinda helped. I have a new regulator but didn't know how to replace it. Anybody know of a youtube guide or point us to a thread in here?

 

[cucvrus]

You can do that with out a video. Did you ever change the glow plugs?

 

[cucvrus]

Lets see some pictures of your gate and the side tracks. I can help you from afar. I have some magic side track I can send you. https://www.steelsoldiers.com/threads/cucv-head-gasket-head-or-change-engine-survey.137671/page-11

 

[2AForever]

Sounds like mine has the same problem. I took the cover panel off and found a lever/guide was catching on the piece holding the glass at the bottom of the glass. Tried to bend it back in and only kinda helped. I have a new regulator but didn't know how to replace it. Anybody know of a youtube guide or point us to a thread in here?

This Video will be helpful IMO

 

[2AForever]

Lets see some pictures of your gate and the side tracks. I can help you from afar. I have some magic side track I can send you. https://www.steelsoldiers.com/threads/cucv-head-gasket-head-or-change-engine-survey.137671/page-11

Thx to all for your reply, time constraints due to work will have me taking it to shop that'll get it done

 

[2INSANE]

I have an old new stock regulator for a manual rear window cucv m1009 for sale if you are interested?

 

[WWRD99]

I have an old new stock regulator for a manual rear window cucv m1009 for sale if you are interested?

Man I need one of those!! Got the 86 blazer ..spring sprung and the teeth eaten gone!!! What's the protocol on getting it!!

Sent from my SM-G955U using Tapatalk

 

[2INSANE]

Man I need one of those!! Got the 86 blazer ..spring sprung and the teeth eaten gone!!! What's the protocol on getting it!!

Sent from my SM-G955U using Tapatalk

Just sold!

 

[2AForever]

I have an old new stock regulator for a manual rear window cucv m1009 for sale if you are interested?

Received, installed Works like charm, thank you.

 

[2INSANE]

Received, installed Works like charm, thank you.

Your welcome!