Looking for specifications axis M101 A3 3/4

[Ronald-Holland]

Hello,

I am new to this forum. I am from the Netherlands. Recently I bought this M101 A3 in Germany.

I am now looking for the specs of the maximum load on the axis, I need to find it on the axis itself.
Does someone maybe know where I could find it?

Many thanks,
Ronald

 

[Jeepadict]

There should be a data plate on the front of the box on the left side. There's another data plate on the left side tongue. If not all the specs are in the TM (technical manual) available to download on this forum. Those specs are also summarized on the link below. Welcome!

M101 Trailer, Cargo, 3/4 ton.

M101 Trailer, Cargo, 3/4 ton. information and photos from Olive-Drab.com

olive-drab.com

Sent from my SM-G970U using Tapatalk

 

[Ronald-Holland]

There should be a data plate on the front of the box on the left side. There's another data plate on the left side tongue. If not all the specs are in the TM (technical manual) available to download on this forum. Those specs are also summarized on the link below. Welcome!

M101 Trailer, Cargo, 3/4 ton.

M101 Trailer, Cargo, 3/4 ton. information and photos from Olive-Drab.com

olive-drab.com

Sent from my SM-G970U using Tapatalk

thanks a lot, I will check it (so I need to have it on the axis as well as its required for the import, in case later another axis was put on it).

 

[Guyfang]

The TM will tell you if more then one axle was used on the trailer. I just look at the TM, and for the M101-A3 the below listed axle was the ONLY one used.

NSN: 2530-01-390-4684
Part # 12362791
AXLE,VEHICULAR,NOND OFFSET
UOC, Useable on code: TC1. The TC1 UOC means it is the ONLY axle used on the M101-A3

 

[Jeepadict]

thanks a lot, I will check it (so I need to have it on the axis as well as its required for the import, in case later another axis was put on it).

If you can post a picture of your axle we can easily see if it's the original axle. The A3 axle is unique to that model.

Sent from my SM-G970U using Tapatalk

 

[Ronald-Holland]

The TM will tell you if more then one axle was used on the trailer. I just look at the TM, and for the M101-A3 the below listed axle was the ONLY one used.

NSN: 2530-01-390-4684
Part # 12362791
AXLE,VEHICULAR,NOND OFFSET
UOC, Useable on code: TC1. The TC1 UOC means it is the ONLY axle used on the M101-A3

thanks a lot, but i need to have it also marked on the axis (in case the previous owner changed the axis later), I check it tomorrow.

 

[Guyfang]

Should be a part number on the axle. Maybe even a data plate.

 

[Ronald-Holland]

Should be a part number on the axle. Maybe even a data plate.

i think too, i will check it in the garage (the mechanic couldn't find it)

 

[Ronald-Holland]

My next project is an own made cover (from an army tent), I keep you posted, final goal is a light camper version

 

[Guyfang]

If you open the TM9-2330-202-13&P, Dated 30 Dec, 2011, to pages (PDF page numbers) 413-414, you will see a drawing of all three types of axles. The #2 axle is the one you want to find on a M101-A3 trailer. And as Jeepadict wrote, very distinctive.

 

[Ronald-Holland]

If you open the TM9-2330-202-13&P, Dated 30 Dec, 2011, to pages (PDF page numbers) 413-414, you will see a drawing of all three types of axles. The #2 axle is the one you want to find on a M101-A3 trailer. And as Jeepadict wrote, very distinctive.

great, i check it

 

[Ronald-Holland]

Thanks, so the number is 1920 1236 791 (i think, its hard to read)
MPR 02686

If you can post a picture of your axle we can easily see if it's the original axle. The A3 axle is unique to that model.

Sent from my SM-G970U using Tapatalk

 

[Evil Dr. Porkchop]

That’s definitely the original m101a3 axle. The number is 19207-12362791 which shows up in the manual for m101a3s.

 

[Ronald-Holland]

That’s definitely the original m101a3 axle. The number is 19207-12362791 which shows up in the manual for m101a3s.

Great, thanks a lot

 

[juanprado]

Welcome to Steel Soldiers and a good looking trailer !

A3 trailer has a slightly higher weight capacity than a A2.
Max weight is 3160lbs on that axle. The reality is that is probably underrated and can handle more.

I have put more than that in a2 and absolutely no problem in a 4 hour ride.

Actual pictures of the data plates here with specifications:

M101A3 data plate - pic needed

I'd greatly appreciate it if an M101A3 owner could post a few pics of their data plates? I need to have some made for my trailer but need to know what they look like. I have the SN for my unit. Thanks! Billsbet0

www.steelsoldiers.com

 

[Ronald-Holland]

1 more question, shouldn't there a rubber plate above the suspension?

 

[juanprado]

There is supposed to be a rubber block bushing on the springs with a u clamp that limits travel in case of bottoming out.
They are difficult to find if the rubber is damaged.

 

[Ronald-Holland]

There is supposed to be a rubber block bushing on the springs with a u clamp that limits travel in case of bottoming out.
They are difficult to find if the rubber is damaged.

thanks, I will search for it

 

[Ronald-Holland]

Sorry again a request, I am searching for the SIN (stock ident. numbers) for the parts I need to order.
I searched over and over but still couldn't find them (not findable/unreadable). I assume, like my axis is, all parts are original.
I am looking for the SIN's of these parts:

- wheel bearing
- handbrake cable
- the plate above the suspension

Does anyone maybe know these codes or could they be in the technical manual as well?
Many thanks in advance

 

[Guyfang]

If you open the TM9-2330-202-13&P, Dated 30 Dec, 2011, to pages (PDF page numbers) 413-414, you will see a drawing of all three types of axles. The #2 axle is the one you want to find on a M101-A3 trailer. And as Jeepadict wrote, very distinctive.

This TM has all the numbers you need. It is in the TM Forum, free for download here in SS. If you have problems finding it, tell us.