Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
meter between pins 8 and 7
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
mep-005a giving me a reverse power warning.
- Thread starter generatorshawn
- Start date
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
Yes I have 0 volts between 8 and 7 while running and the reverse current light is on and off
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
what do you want the video of?
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
yes i have 0 volts rather the reverse power light is on or off
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
ok I follow you now. Next meter chassis to pin 7 and chassis to pin 8
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
Also 0 for both
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
ok same thing for K14 pins 5 and 6.
just double checking, youre doing this with the set running and meter on dc right?
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
Yes while running and dc on meter
k14 5 and 4 0vdc 4 to ground 27vdc 5 to ground 0 Vdc this is the same with light on or off
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
5 and 6 not 4 and 5
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
My bad checking now
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
That is zero as well also checked both to ground same and same with light on and off also there’s nothing connected to those terminals k14 the over voltage relay correct?
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
K14 is the Overload relay
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
Ok yes I checked the correct one and have 0 also mine has nothing connected to those 2 terminals also checked both to ground and with light on and off all results were 0
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
on K14 find wires P62H18 AND P61A18 what pins are they on ?
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
p62h18 goes to pin 6 on the overload protection device
P61A18 goes to pin 8 on k15 revers power relay
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
K14 has
Pin 1 x9v18c
Pin2 x12f18n
Pin 3 p58818
Pin 4 p5cx18
Pin 5
Pin 6
Pin 7 p206d18
Pin 8 p200v18
Scoobyshep
Well-known member
- 1,090
- 1,403
- 113
- Location
- Florida
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
0 volts
generatorshawn
Member
- 55
- 7
- 8
- Location
- gainesville fl
So this morning I tried removing the wire from pin 8 and pin 1 not at the same time but still Same result I figured out that not always but sometimes I can put it in battle short close the breaker reset thebwarnign light and turn off battle short and it will stay running with breaker closed and no reverse power light on not sure how long it would stay like this it also started and closed the breaker with no issues last night and when I went to test pin 8 and 3 for power it came back could just be a conicidence. But for a few minutes it was working I could open close the breaker several times now the issue is back