Kinfofnothing37
New member
- 3
- 0
- 1
- Location
- Ny
Any info would be much appreciated this is my first teardown of one of these Generators. Thanks all
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mep-802a looking for pistons and rings possibly a cylinder head.
- Thread starter Kinfofnothing37
- Start date
Kinfofnothing37
New member
- 3
- 0
- 1
- Location
- Ny
Also I did get this to run but it wasn't pretty the rust in the pistons must have been worse than I thought.
- 6,069
- 4,437
- 113
- 3,829
- 5,945
- 113
- Location
- MA
I might have a complete engine available in MA.
Ray70
Well-known member
- 2,595
- 5,912
- 113
- Location
- West greenwich/RI
I also have both the parts ( standard bore ) you need as well as complete rebuilt engines. Just let us know what you find / decide once you tear into it.
You can also get new ( pistons and rings ) from Mayi Diesel on-line, also available oversized if you have to over-hone the block.
If it's pitted bad you can use a Lisle micrometer style hone to oversize it. I have done it several times with 100% success going .010" and .020" over.
You can also get new ( pistons and rings ) from Mayi Diesel on-line, also available oversized if you have to over-hone the block.
If it's pitted bad you can use a Lisle micrometer style hone to oversize it. I have done it several times with 100% success going .010" and .020" over.
Kinfofnothing37
New member
- 3
- 0
- 1
- Location
- Ny
How much? No smoking?