Squirrel wiring damage on my M925

[watson76]

A squirrel did a number on my M925,bit several wires off between the cab and transmission.
Has anyone had to replace wires in this area ?, it's hard to tell what wire goes where and is in a tough spot to get to.
It looks like access in the engine air filter area might be the best route but any advice is appreciated.

 

[Elk1111]

You’d probably have better access under the drivers side fender and from under the truck. The frame is blocking everything by the air filter.

 

[watson76]

You’d probably have better access under the drivers side fender and from under the truck. The frame is blocking everything by the air filter.

The wires are more on the drivers side but the frame and the driveshaft are in the way.

 

[Elk1111]

It’s a hard area to get access to. You’ll be wishing your arms were longer for sure.

 

[watson76]

It’s a hard area to get access to. You’ll be wishing your arms were longer for sure.

I did find the wire that goes to neutral safety switch and she cranks now, it will be nice to get it in the driveway and figure out where the rest of the wires go.