DaneGer21
Well-known member
- 614
- 1,162
- 93
- Location
- Creston, Ohio
Looking for (4) MRAP wheels for a deuce project! No ctis needed.
‘Mise well put a feeler out now!
‘Mise well put a feeler out now!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Findlay Ohio 2022 show, Sell, Trade, Wanted List/ May19-22
- Thread starter DaneGer21
- Start date
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
2022 edition of Findlay Military Show will be held at Hancock County Fairgrounds, Findlay OH, starting on 19th May. It is a 4 day event and Sunday is mainly a get the hell out of dodge day.
I will have my regular spaces in the open sided AG shelter along with a lot of the SS folks, bout 1/2 way up on the east side by the squeeze chute!
I will have my regular spaces in the open sided AG shelter along with a lot of the SS folks, bout 1/2 way up on the east side by the squeeze chute!
Day Tripper
Member
- 90
- 21
- 8
- Location
- Rockford, Ohio
Picked up this 1951 beauty a few weeks ago. It seems like she needs everything so this might be an on going list as i go through her. Right now, I'm looking for a spare rim/tire and the cab cover for now.
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
Will have a few military aircraft seats. One from a EC-135 aircraft. I will also have a set of DC-9 seats complete with ashtrays and sic sacks. Will have some uniforms, some misc parts and some ordinance. If any one is interested I will bring some deuce/five ton doors, Scout car fenders, and some WWII power wagon front end parts. Again, the last few things will only be on my trailer if someone specifically asks. I will also have a VAT-40 electrical system tester.
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
My son is looking for a S250 shelter and troop seats for a CUCV. Also would be interested in the bows and cover possibly. Super singles for my five ton are also needed if a reasonable price.
DaneGer21
Well-known member
- 614
- 1,162
- 93
- Location
- Creston, Ohio
Message sent
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
Looking for decent both CUCV front fenders and inner fenders. Let me know what you got. Also looking for the 6.2 diesel 700R4 kickdown bracket. and 6tls at a good price.
JWenig
New member
- 14
- 0
- 3
- Location
- La Rue, Ohio
I'll be set up as usual. I have a 3 point hitch Allis-Chalmers tool bar just under 8' long in Sparta, NC that I need hauled to Findlay. The only thing mounted on the toolbar is 2 no-til coulters and 2 pneumatic gauge wheels. As is, it would fit into an 8' pickup bed, or could be easily disassembled. Would pay $200. Let me know if interested. Jim
- 3,748
- 1,521
- 113
- Location
- North Carolina - FINALLY !
You going by my way?
How far off I77 is it? Can I get a crew cab Duramax towing a 24' long car hauler in and out? I will not be sure of the load out from down here until the week before.
JWenig
New member
- 14
- 0
- 3
- Location
- La Rue, Ohio
Looks like around 25 miles NW up US21 from the US21-I77 split, up near Sparta, NC. I am going to need a commitment prior to the week before though. Our agreement was to have it moved by the middle of May when I bought it. Sounded like it would be a little difficult to get up his 1200 foot driveway, but he said there is a grassy area along the road where he could bring it down with a loader tractor.
Instead of doing this over steel soldiers, contact me direct at EMD567@atlanticbb.net
Could I get the physical address? That way I can fly over the route, and make sure I won't get trapped.
Could I get the physical address? That way I can fly over the route, and make sure I won't get trapped.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Can one of you fine folks explain to me how Findlay show works regards vendors and camping please.
Junkyard Wars Crusher
12B20
- 1,289
- 220
- 63
Hey Kenny
If you make it up here, I have some 5ton dump truck parts I've been saving for ya!
There isn't really a dedicated camping area. I usually sleep in the cab of my truck. Some folks pitch a tent near our vendor spots. Fairgrounds showers on site are marginally adequate.
I've never "purchased" a vendor spot. Usually just hang around with the other regulars from this site. You know them.
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
Looking forward to this!
I have an m36 canvas cargo cover, and a m35 canvas cover. Doubt I will ever put canvas on one of my trucks. Both in real good shape, kept inside.
Will probably throw other nick nacks in to sell as well.
Looking for a 3.07 geared civi rear end, a set of used tracks off a mini excavator or skid steer (don't really care what size. 8-10in wide)
I have an m36 canvas cargo cover, and a m35 canvas cover. Doubt I will ever put canvas on one of my trucks. Both in real good shape, kept inside.
Will probably throw other nick nacks in to sell as well.
Looking for a 3.07 geared civi rear end, a set of used tracks off a mini excavator or skid steer (don't really care what size. 8-10in wide)
Aurora
Member
- 122
- 4
- 18
- Location
- Northeast OH
I’m interested in the canvas m35 cargo cover. Let me know how much. Thanks
Sent from my iPhone using Tapatalk
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
$400
Aurora
Member
- 122
- 4
- 18
- Location
- Northeast OH
I’ll take it. What days do you plan on being there?
Sent from my iPhone using Tapatalk