Bulletpaluza
Member
- 33
- 66
- 18
- Location
- Georgia
Is it necessary to flip the hubs? Is there a clearance issue if they are not or does it just look stupid?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35a3 wheels on a M35a2
- Thread starter Bulletpaluza
- Start date
ToddJK
Well-known member
- 1,321
- 4,518
- 113
- Location
- Sparta, MI
You flip the hubs only if you want to single the rear tires. This is due to the lug nut studs, they are long enough for two tires, flip the hubs and it shortens the lug stud so you can add just one tire and properly tighten it down.
- 849
- 1,740
- 93
- Location
- N. Central Idaho
.
- 6,987
- 2,526
- 113
- Location
- Montevideo/Uruguay
Nah... really???
williamh
Well-known member
- 473
- 648
- 93
- Location
- SanDiego Ca.
Not quite. Flipping the hub moves the wheel out a few inches so it doesn’t look funny with the inside rim only. The studs are the same length , the “nut” that goes on the inside wheel has threads on it for another nut to hold on the outside wheel.
williamh
Well-known member
- 473
- 648
- 93
- Location
- SanDiego Ca.
Inner Left Budd Style Lug Nut for M35, M35A1, M35A2, M809 Series, M939, M939A1 Commercial Trucks
Inner Left Budd Style Lug Nut for M35, M35A1, M35A2 2 1/2 Ton Trucks, M809 Series 5 Ton Trucks, M939, M939A1 5 Ton Trucks and Commercial Trucks NSN 2530006931029 PN 10709
www.easternsurplus.net
Bulletpaluza
Member
- 33
- 66
- 18
- Location
- Georgia
So I don't technically have to flip my hubs?
williamh
Well-known member
- 473
- 648
- 93
- Location
- SanDiego Ca.
I don’t think so. As long as the tires don’t rub on the inside. Don’t know how wide the tires your installing are. But if it’s the 395’s no.
Bulletpaluza
Member
- 33
- 66
- 18
- Location
- Georgia
Awesome! This is going to make the switch much easier!
ToddJK
Well-known member
- 1,321
- 4,518
- 113
- Location
- Sparta, MI
Sorry I effed up on that one. I answered that question while going on 30 hrs of no sleep, lol.