MW24C CASE LOADER

[maa45069]

I need to load up this loader but doesn't have a steering wheel. After calling case it seems they don't have part numbers for the steering wheel assembly and told me the military version steering was different than the regular case w24c. If someone could help me find part numbers and what parts I actually need for this loader that would be very helpful. The place where I purchased has another loader that had a steering wheel. I have pics of both. Thank you for the help. Mine is the one with no steering of course. I can't tell if it was broken off or if it was telescoped down.

 

[Guyfang]

Below is the link to all the TM's for the MW24C, other then the TM 5-3805-262-10-HR.

TM's for the MW24C Scoop Loader

Here are all the documents for the MW24C Scoop Loader other then the TM 5-3805-262-10-HR. That document is not coded for Public Release.

www.steelsoldiers.com

 

[maa45069]

Here is the parts TM. Do you need the rest of the TM's? If so, I have to upload them in the morning. Its 00:31 right now.

Edit: Wrong TM!! Here is the right one.

Wow you are awesome thank you and yes I could use them all!

 

[simp5782]

Cut the rubber boot off the top and use vise grips to steer it.

 

[Guyfang]

MAA,

I cleaned up the thread a bit. Instead of posting the -24 P here, I posted all the TM's for the MW24C in the "Misc Equipment Forum.

 

[maa45069]

MAA,

I cleaned up the thread a bit. Instead of posting the -24 P here, I posted all the TM's for the MW24C in the "Misc Equipment Forum.

Thank you very much for your help

 

[maa45069]

Cut the rubber boot off the top and use vise grips to steer it.

UPDATE:Btw this was gold! i took that boot off and was able to get some vise grips on it and could steer a little. I went for my 3rd time trying to get this piece of equipment and boy is it stuck. 1 tire is absolutely demolished and off the rim and another is not taking air(Looking for a used 20.5xR25. It is stuck in the middle of a mud field. had to send the Transport truck home yesterday because we couldnt get it to a position where they could load. the front brakes are seized up and dragging. and the front drive shaft is broken. I did however get it to start thankfully, and with the help of a dozer and 1 rear tire spinning got it moved about 20 ft but still unsuccessful. Really doubtful even if we loaded it that i would be able to unload this loader with my deuce or m1078. Looking into possibly renting a dozer or if anyone close has a wrecker that could help i would appreciate it.

 

[simp5782]

A landall trailer can winch it right on.

 

[maa45069]

A landall trailer can winch it right on.

I did listen to your advice and hired one.. but he doesn't think we can pull it off his trailer with just a duece or m1078

 

[simp5782]

I did listen to your advice and hired one.. but he doesn't think we can pull it off his trailer with just a duece or m1078

Chain the Deuce and 1078 together. Run his cable out and under the loader to a snatch block at the trucks and pull the loader off using the cable

 

[simp5782]

Cable pressure under the bucket will lift the bucket if you pull the hydraulics lever and hopefully it will hold itself up

 

[maa45069]

Chain the Deuce and 1078 together. Run his cable out and under the loader to a snatch block at the trucks and pull the loader off using the cable

I messaged the transport guy and he said he would be willing to do this. Thank you so much!

 

[George P]

Below is the link to all the TM's for the MW24C, other then the TM 5-3805-262-10-HR.

TM's for the MW24C Scoop Loader

Here are all the documents for the MW24C Scoop Loader other then the TM 5-3805-262-10-HR. That document is not coded for Public Release.

www.steelsoldiers.com

Trying to find out what a MW24C takes for Transmission oil. Thanks