I just replaced the starter with an new reduction drive unit. The original starter was getting 24volts, but only made a clunck and didn't really turn the motor. The new starter is also getting 24volts, but doing the same thing. Do any of you have an idea on what to look for next? Thank you for the help in advance.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M817 Start Problems - Need Help
- Thread starter Mack90
- Start date
Is it stuck in gear? Motor spin freely with a socket and breaker bar?
Put the transfer case in neutral and see what happens
the truck only has 120 hours on it. The motor will turn and we almost hadit running pull starting with a tractor. I will try with the transfer case in neutral.
davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
before you installed it, you should have tested it on the floor with a battery and jumper cables to make sure it spins AND the bendix gear slides forward and spins also. even a 12vdc battery will do it at a slower speed.
That would have been a really good idea
davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
Its pretty easy to pull out and do it and save you a troubleshooting headache by being able to completely eliminate that part.
162tcat
Active member
- 710
- 46
- 28
- Location
- Washington
Probably a bad connection or batteries low. If motor spins but both starters have same issue, what is left? Batteries and cables.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
he can load test the batteries individually. https://www.harborfreight.com/100-a...r-61747.html?_br_psugg_q=battery+load+testersI bought one a while back and it really saved me lots of dollars since I got about 40 + batteries and live in a cool climate area.
162tcat
Active member
- 710
- 46
- 28
- Location
- Washington
Get it worked out?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Unfortunately no. I have had other projects eating up my time. I am going to give it a go this weekend.
162tcat
Active member
- 710
- 46
- 28
- Location
- Washington
It’ll be a simple wiring issue or bad batteries. If you have a 24v or 2 12v chargers, let it charge and try. If same issue it’s definitely wiring or connection.
Sent from my iPhone using Tapatalk
162tcat
Active member
- 710
- 46
- 28
- Location
- Washington
Careful when reinstalling the fuel filter if removed. The bolt at the top that holds the canister in place likes to leak and suck air which will cause all sorts of issues.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk