Eberspacher v7s help

[Elmer thud]

Hi oboyjohn I’m looking for information on the eber v7s I have one out of the military M.A.N KAT1 but I don’t know how to wire up power to it I have loads of photos and a rough idea what a few connections are big all my wiring is white with numbers dies anyone on here knows out these things cheers Elmer

 

[Elmer thud]

Photos of heater and controllers

 

[Guyfang]

Maybe @Migginsbros might know?

 

[Migginsbros]

This may help

 

[Elmer thud]

This may help

Danka. Thank you. Do you have knowledge of these variant 1 as for the control socket arrangement bottom socket of the 3 sockets comes from the vehicle would you know what pins are pos v+. and which are Neg - from vehicle thank you for the diagram and manual it will come to good use. Paul

 

[Migginsbros]

Paul I´m not familiar with the heater .

 

[Migginsbros]

Paul there are 2 electric diagrams. Second without TrbF is easier. TrbF means Transport of flamable Liquits. There is an decal on the dashboard .

 

[Elmer thud]

Paul there are 2 electric diagrams. Second without TrbF is easier. TrbF means Transport of flamable Liquits. There is an decal on the dashboard .

I see that now but as mine had all
The relays for the trbf system
I wondered if it was just easier to bypass the emergency cut off relays side of it but I’ll look at it carefully before I decide not sure yet if I can just use the relays from the ststem
Having to save on buying more. Cheers paul I’ll be in touch let you know

 

[Elmer thud]

This may help

I think I have worked it out not sure yet as I haven’t put power to it I’m looking for a negative wire that’s not there

 

[Elmer thud]

I think I have worked it out not sure yet as I haven’t put power to it I’m looking for a negative wire that’s not there

Thank you for the manual and diagrams have it working now thanks to you
Regards paul

 

[Elmer thud]

Thank you for the manual and diagrams have it working now thanks to you
Regards paul

I’m going to try and get some alternative controller ecu and pulse ignition units do you know where I could get any second hand do I can wire it to the second diagram non trbf

 

[Migginsbros]

Paul, this is a german Kat forum. https://www.kat-forum.de/search.php?keywords=Eberspächer&fid[0]=20