Axle (s) rebuild thread, gears and lockers

[aw113sgte]

What sealant does everyone recommend for differential install and hubs?


Sent from my iPhone using Tapatalk

Permetex black (oil resistant) has worked well for me for my 12 hub swaps

 

[Keith Knight]

this what I used.

 

[GeneralDisorder]

View attachment 913415
this what I used.

Used to use that a lot. It's AWEFUL to clean up if you ever have to go back in there. I personally use The Right Stuff black. It's a "1 minute RTV silicone." Works amazing on SBC china walls.....

Hylomar would be another interesting choice. Also requires a special solvent but it's reusable. It's like the sealant equivalent of velcro.

Hylomar® Universal Blue - Hylomar

Universal Blue

hylomar.com

 

[ramdough]

Made some progress. Made my own extended socket.
And removed up to the brakes.



Strange thing was the inner seal stayed on the shaft and not the hub.

 

[aw113sgte]

Made some progress. Made my own extended socket. View attachment 913535
And removed up to the brakes.

View attachment 913534

Strange thing was the inner seal stayed on the shaft and not the hub.

I've heard that happens although mine have come off with the hub so far. I also made my kids learn welding for the hub nut

 

[Wingnut13]

Good, make them earn their keep!

 

[Ronmar]

Good age to get them started. Give them scraps to weld up. Had my grandson run beads on my tractor bucked edge… A LOT of them then we ground them down and shaped a fresh hardened edge…

 

[ramdough]

Anyone know how the ABS sensor comes out? Maybe I need to look harder but I don’t see a screw on mine.


Sent from my iPhone using Tapatalk

 

[aw113sgte]

Anyone know how the ABS sensor comes out? Maybe I need to look harder but I don’t see a screw on mine.


Sent from my iPhone using Tapatalk

Pull and wiggle essentially. There is a spring clamp holding them in.

https://graphicvillage.org/meritor/TP02102.pdf

 

[ramdough]

Pull and wiggle essentially. There is a spring clamp holding them in.

https://graphicvillage.org/meritor/TP02102.pdf

Perfect! That was what I needed to know. I was concerned that it was threaded in or something weird.


Sent from my iPhone using Tapatalk

 

[ramdough]

ABS sensor popped right out. I had to use a small screw driver to get the first 1/8 to move. Also had to use a small pry bar on the brake shoe to get the last 1/8 to clear.


Sent from my iPhone using Tapatalk

 

[ramdough]

Just realized, I forgot to buy these seals.

 

[ramdough]

View attachment 913551

Just realized, I forgot to buy these seals.

Anyone have a source for these seals? MWM probably does, but I bet they are not cheap.

 

[B-Dog]

Anyone have a source for these seals? MWM probably does, but I bet they are not cheap.

I bought a bunch from Neil, the snowplow guy. You can get his email from his youtube page:

https://www.youtube.com/@NEILSWORLD

 

[ramdough]

I bought a bunch from Neil, the snowplow guy. You can get his email from his youtube page:

https://www.youtube.com/@NEILSWORLD

I reached out to him. Thanks!

 

[ramdough]

Update….. after a bunch of wiggling, got the intermediate axle 3rd in.

 

[ramdough]

After about an hour of trying, failed to get the front in. It keeps hitting something and I cannot figure out what. Gonna clean the rtv off in the morning and try again.

 

[ramdough]

I reached out to him. Thanks!

He does not have any. He recommended reaching out to Bryce, but I don’t have Facebook.


Sent from my iPhone using Tapatalk

 

[ckouba]

You may still be able to see this:

Bryce & Sons Military Truck Parts

Bryce & Sons Military Truck Parts. 1,553 likes · 1 talking about this. Just for fun

www.facebook.com

Will text you the number I have for him in a moment.

 

[ramdough]

You may still be able to see this:

Bryce & Sons Military Truck Parts

Bryce & Sons Military Truck Parts. 1,553 likes · 1 talking about this. Just for fun

www.facebook.com

Will text you the number I have for him in a moment.

Thanks, they are on order.


Sent from my iPhone using Tapatalk