• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-803a starts, then stalls - SOLVED

jzuilkowski

New member
12
19
3
Location
North Carolina
I can start it up, but then it stalls almost the second I let go of the start switch. The temp light comes on saying it is overheated, even though it's ice cold. Fuel tank is 3/4 full.

I haven't run it properly for maybe a year, or a year and a half. Before this it always worked without issue.

I'm sure it's probably a bad sender, and I have a spare machine. But I wanted to check you you folks before I go on an expedition.

Why would you folks recommend I do?
 

Light in the Dark

Well-known member
Steel Soldiers Supporter
3,753
5,685
113
Location
MA
The sender and the overtemp are two different items in the set. Disconnect the two wire unit off the water pump, clear the fault at the panel, and see if it runs properly without shutting down. If it does, the overtemp switch is the culprit.
 

jzuilkowski

New member
12
19
3
Location
North Carolina
Sure enough, I popped those 2 wires off and it fired up and stayed running.

So I pulled one off another gen I had, and went to take this one out and it broke off after the threads in the water pump. I was able to drill and bend it around with a scratch awl enough to be able to extract it with a long screw.

All good now. I've ordered some spares.

Thank you much!
 

jzuilkowski

New member
12
19
3
Location
North Carolina
Green Mountain Generators, or ebay. If you have something super specific, like the main rotary switch, that's a tough one. It really depends.

The only way to "convert to civilian" that I know of is to sell it and buy a civilian generator. I wouldn't do that.
 

FarmingSmallKubota

Well-known member
Steel Soldiers Supporter
455
1,084
93
Location
Wapakoneta, Ohio
Just a question. Where do most gen people buy your parts? Also would you convert to civilian or stick with original make?

Sent from my SM-G781U using Tapatalk
Put a parts wanted ad up in the classified would be the best and cheapest way to get parts. Due to Cost Green Mountain would be my last choice
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks