• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What was this HMMWV trailer used to carry?

Guyfang

Moderator
Staff member
Moderator
16,827
24,234
113
Location
Burgkunstadt, Germany
If its something that was not prototype, then there will be a data plate someplace on the frame or fenders that will tell you what it is. Look on the right fender first.

I am going to guess its a "Volcano" launcher. Avenger rounds are much smaller that the Cradles, (brackets) in your picture. And the in one picture I see some kind of system that runs wire or hoses(?) to the cradles.
 
Last edited:

Thunderbirds

Well-known member
267
383
63
Location
Northern Black Hills South Dakota
In the Air Force we used similar type of bomb lifts to load 500 lbs and 2,000 lbs bombs onto the B-1 bomber. Also, we loaded FLIRs and radar equipment onto the outside. I could imagine this being a rocket loading lift for Army helicopters or gunships... Is there anything indicating what service used this trailer?Bomb Lift.JPG
 

juanprado

Well-known member
Steel Soldiers Supporter
5,621
2,930
113
Location
Metairie/La (N'awlins)
On the right fender there is a special data plate but can not zoom in on it to read clearly.

At the same place, there is another "special" m1101 that looks like it was cobbled together. It is also unique but has a civy light plug and non military lights.
 

juanprado

Well-known member
Steel Soldiers Supporter
5,621
2,930
113
Location
Metairie/La (N'awlins)
In the Air Force we used similar type of bomb lifts to load 500 lbs and 2,000 lbs bombs onto the B-1 bomber. Also, we loaded FLIRs and radar equipment onto the outside. I could imagine this being a rocket loading lift for Army helicopters or gunships... Is there anything indicating what service used this trailer?
Marked US Army
 

HoveringHMMWV

Well-known member
Steel Soldiers Supporter
488
1,143
93
Location
AL
I’m just not seeing the hoses and cylinder(s) that y’all are speaking of. Looks like a typical M1101/1102 chassis complete with the wiring harness. Same wiring harness that I had to replace on my M1101 purchase and is even attached to the frame in the same location. Interesting in-house trailer mod though and looks hinged at the rear for vertical adjustment.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks