• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Air compressor belt

rat4spd

New member
652
10
0
Location
Evansdale, Iowa
Ditto on the NAPA part number. I didn't even use a compressor wrench, or need to hold the outer part of the sheave with a wrench. Tightened up using the back half with a BF crescent wrench. Worked good.
 

jwaller

Active member
3,724
19
38
Location
Columbia, SC
Ditto on the NAPA part number. I didn't even use a compressor wrench, or need to hold the outer part of the sheave with a wrench. Tightened up using the back half with a BF crescent wrench. Worked good.
I did the same thing. for the 1 or 2 times in my life that I should need to change that belt I'll continue to do it this way.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks