can someone measure the D-ring mounting stub

[merace19]

The part that sticks out in the front that the d ring is attached to. Need to know how wide and tall. Then how far back from the front of it to the edge of the shackle hole.

http://i70.photobucket.com/albums/i91/merace19/militarytr.jpg

 

[merace19]

Anyone?

 

[army98]

I can tomarrow if that will help

 

[merace19]

I am out in the cold building a mount for a tow bar is the only reason I need them.

 

[dependable]

one and one half inches

 

[merace19]

care to elaborate a little? A,B or C?

 

[dependable]

One and 1/2 inches wide. approx Two and 1/16th inches tall. approx 7/8 in from front of d ring mount to 1 in d ring hole. front of mount is slightly rounded. Hope this helps, be carefull on your tow.

 

[dependable]

A : 2 1/16 B : 7/8 C: 1 1/5 all in inches.

 

[merace19]

I eyeballed it and missed the tall part by a .75 of inch. I am making a mount to just slide over that piece that sticks out from the bumper.

 

[merace19]

Thanks a bunch. Really helped me out.

 

[merace19]

Thanks to every one here. I used the info here to build me a tow bar and it worked great. Million times better than a trailer.

 

[merace19]

here is the click free pic

 

[niferous]

How wide between the d-ring attaching points? The inside distance that is. I too am trying to make a tow bar!

 

[doghead]

How wide between the d-ring attaching points? The inside distance that is. I too am trying to make a tow bar!

28 3/8" inbetween the mounts.