67buickss
New member
- 58
- 0
- 0
- Location
- clinton twp. michigan
anyone have a 24 to 12 conversion for starter, i need diagram. engine turns when connection top post on solenoid to power ?????? so im confused
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
starter help
- Thread starter 67buickss
- Start date
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
Well you have a bad starter or power coming down to the relay. check it out before you go install a 12v starter. If you look at the wkki you will find out how to do the 12v starter.
Ken_86gt
Member
- 428
- 2
- 18
- Location
- Williamsburg VA
If there is power on the on the wire that you connect to the starter solenoid - then of course the starter will run. That is how starters work. Are you asking how to convert your truck to a 12V starter? The wire that you attach to the starter solenoid should only have voltage when the key is turned to the start position.
Last edited:
CUCV85
Member
- 309
- 4
- 18
- Location
- central/ny
Conversion Conversion of M1008 and M1009 Electric Systems to 12 Volt (PDF)
Conversion of M1008 and M1009
Electric Systems to 12 Volt
PDF file will appear 10 pages with great pictures.
Search 24 volt to 12 volt convertion CUCV using Yahoo search engine.
Conversion of M1008 and M1009Electric Systems to 12 Volt
PDF file will appear 10 pages with great pictures.
- 2,479
- 25
- 38
- Location
- Houston Texas
There is a relay under the dash near where the radio would be. It's small. About a inch by two inches. It has failed in the closed position. Causing the starter to turn. You can buy a A/C fan blower motor relay for a 1982 chevy truck from the auto parts store. It's the same part. Unplug the old one and plug in the new one. You should be good to go.