Civy Wipers

[BEASTMASTER]

my thanks to all of you for the info. it's really really great when i can go from one end of my plow route to the other without reaching out to knock the ice of the wiper every 1000 feet. i suffered 5 years, and it was soooo, simple...thanks again guys....

 

[gunit]

my bad srodocker, i used the the 41-01 arms

 

[SGTStewart]

I just ordered a set of the 41-01 arms from the local O'Reilly part store. Should be in nest tuesday. I hope they work. Thanks for the info guys.

 

[srodocker]

man i went to shucks o'reilly and they dont carry the part ? also went to napa and autozone...bleh

 

[markmontana]

My Carquest had the napa equivalent (1 in stock and got the other one in a few days). But they were very pricey- check around. No need to pay a high price.

-

 

[srodocker]

me and an/arc186 (dan) customized my wiper arms by just drilling a tiny hole in the arm and placing a screw through a pair of 11" anco blades...work perfectly...

 

[FMJ]

man i went to shucks o'reilly and they dont carry the part ? also went to napa and autozone...bleh

Zip Code Select | O'Reilly Auto Parts

 

[dittle]

I put these wipers on my Deuce and so far I like them alot. Just make sure to use a little loctite on the nut that goes on wiper motor shaft.

 

[ElkHunter61523]

Thanks for the info. It was an easy fix to do. Took me all of 15 minutes. Total out the door from Oreilly's was just over $30.00.

 

[Heavysteven]

I installed mined worked for a while then they flew off. For real the wiper flew off the arms litterally. Any had this problem?

 

[dittle]

Did you get the catch spring locked in behind the splined collar you installed on the motor shaft? It doesn't sound like it it latched.

 

[kurtkds]

I finally decided to put some wipers on that are worth a crap. The total on all of the parts came to about $30.00. I ordered them through a local Napa dealer.
It was $14.89 per side.
The arms are Anco part number 41-01,
The wipers are Anco part number 31-13.
The arms are adjustable for length plus or minus one inch and they are also adjustable for arm angle.
Pull the stock arm,
Install the proper knurled adapter with a drop of red loc-tite and new included nut,
Put the wiper on the arm with the included fitting,
Put a drop of red loc-tite on the arm and install.
The install was an easy twenty minute job but the results are well worth it.

I just finished up the M818 with similar parts. I used the Anco 30-13 wiper blade for mine, it's a plastic covered metal blade. Total time was about 15 minutes, no trimming required like the last time I did it on the Deuce.

Next will be a coat of flat black.

 

[kurtkds]

how do the air motors work with the bigger wipers? and i defiantly have to get them...i'll look through the thread for napa part numbers

Scott, I drove around this afternoon, didn't have a problem, the air motors have enough muscle to move them just fine.

 

[hklvette]

From what I've heard, the anco 41-01 has been discontinued. I tried to pick up some for my deuce, bot nobody local (incl. NAPA) has them.

 

[bigmike]

I finally decided to put some wipers on that are worth a crap. The total on all of the parts came to about $30.00. I ordered them through a local Napa dealer.
It was $14.89 per side.
The arms are Anco part number 41-01,
The wipers are Anco part number 31-13.
The arms are adjustable for length plus or minus one inch and they are also adjustable for arm angle.
Pull the stock arm,
Install the proper knurled adapter with a drop of red loc-tite and new included nut,
Put the wiper on the arm with the included fitting,
Put a drop of red loc-tite on the arm and install.
The install was an easy twenty minute job but the results are well worth it.

I got just what you listed. Looks way better than Saturn Surplus's crap...but it was way more $$$$.

the 41-01 was $33.00 each. I sent $70.00 for my wipers.

 

[DUG]

Amazon.com: Anco 4101 Wiper Adjustable Arm - 1": Automotive

13 bux.

 

[militarysteel]

i am heading up to napa on friday, great info

 

[srodocker]

oh man were having storms and nboy do they make a difference

 

[AN/ARC186]

From what I've heard, the anco 41-01 has been discontinued. I tried to pick up some for my deuce, bot nobody local (incl. NAPA) has them.

I ordered some 41-01's from O'Reilly's(Schucks) just a couple of weeks ago, I called this morning, they are still available.just not a normally stocked item, they have to be ordered.

 

[MWMULES]

I installed mined worked for a while then they flew off. For real the wiper flew off the arms litterally. Any had this problem?

I have not had a problem and the last time I used them my passenger side went into HYPER-DRIVE. Did you use lock tite on the nut and on the knurls? Also my O'Rileys did not have them in stock but had them by noon the next day.