M1009 wiper speed ?????

[REDWOLF]

Does anyone eles have the problem off there wippers being really slow even on high ? I MEAN REALY SLOOOOOOOW.

 

[CROM]

Sounds like you need a new wiper motor, if it is slow/struggling at all settings. You can pull one out of any K5 blazer at a junkyard for cheap. I'm sure replacement is in the manuals.

 

[tamecrow]

Does anyone eles have the problem off there wippers being really slow even on high ? I MEAN REALY SLOOOOOOOW.

Unplug the connector with the 3 chokes on it and plug the connector from the trucks wiring harness directly into the wiper motor. Worked for me.

 

[319]

Also check for binding of the linkage.
As stated in the above post, you can pull one from any GM truck of that era.
I'd suggest finding a truck with the wiper motor without the washer pump and getting the separate washer
fluid tank with the internal pump. Much more reliable.

 

[MuleMac01]

i found out of your truck does not have enough voltage aka in the green on the volt meter when the tuck is running the wiper motor won't go fast enough

 

[Midnight]

Unplug the connector with the 3 chokes on it and plug the connector from the trucks wiring harness directly into the wiper motor. Worked for me.

your the man , that fixed mine!! had already replaced the wiper motor , but i guess ill just leave it in since its already done