• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

battery cable problem

jmsneorrcom

New member
46
0
0
Location
akron, ohio
84 M1009 - would not start so I replace all the battery cables(started right up) - now the Generator 1 light is on - batterys are fully charged and it seems the alternator is charging - any Ideas? - thanks
 

Oldsouthernboy

New member
164
0
0
Location
Jacksonville, al
OH I know what you mean. My Alt was the same on the #1 light on. It checked out good, but I pulled it and had a alt shop check the alt out. The internal voltage regulator was shot so were the diodes. Cost me 76.00 for a rebuild.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
The TM 9-2320-289-34 has a section for disassembling the alternator and testing the components.

The Diode-trio is one of the items that fails and is cheap to replace. It has been discussed many times.

Here is a company that I and many others have used. You can buy the entire rebuild kit or just the pieces.

High Output Alternators - Alternator Parts - Starter Parts - Repair kits - DELCO 27SI HEAVY DUTY REPAIR KIT

High Output Alternators - Alternator Parts - Starter Parts - Repair kits - DIODE TRIO
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks