16 inch rim for m880 series

[fallen]

can anyone advise what type if 16 rims i can get for my m886 would the humvee rim fit if will the tires fit thanks

 

[Recovry4x4]

HMMWV rims will bolt up but you need spacers to run them. Dodge or pre 99 Ford stuff will bolt up, GM will not due to a smaller center hole. Any 8 on 6 1/2 aftermarket wheel should suffice! Lots of 8 lug for rim s in the boneyards.

 

[doghead]

Never mount a 16.5 tire on a 16" rim. Never mount a 16" tire on a 16.5" rim.

Please clarify your question. Proper grammer would help.

 

[Bob H]

Citizensoldier told me that the cucv rims will fit on a M880.
I have not seen this in person, but I do know the D60 in the rear of the M880 requires a 4 7/8 center hole in the wheel.
bolt circle is 8 on 6.5"

 

[lacoda56]

Nope, GM rims have a smaller center hole and will not fit on the dodge. I have a stock set of CUCV rims with humvee tires for my 882 and it's a no go.

 

[Westech]

hmm where did you get the tires from?

 

[MWMULES]

humvee rims will fit BUT you will need 2" spacers on all wheels and will need to trim the forward bottom of the front wheel well. The pictures don't show the trim job.

 

[Bob H]

Nope, GM rims have a smaller center hole and will not fit on the dodge. I have a stock set of CUCV rims with humvee tires for my 882 and it's a no go.

As I always thought!
the Chevy rims are 4 3/4 in the center

 

[lacoda56]

Westy,

I got 'em from some nut that picked them up on the other side of Iowa, and I believe he got sunburned, besides!

 

[Recovry4x4]

Never mount a 16.5 tire on a 16" rim. Never mount a 16" tire on a 16.5" rim.

Please clarify your question. Proper grammer would help.

Don't I feel like an F'n idiot. I completely missed the fact that he was inquiring about 16" rims then asked abouth the HMMWV rims.

 

[SETOYOTA]

i have a m880 16.50 you can have for the shipping cost