2011 GA Rally Buy/Sell/Trade Thread

[sail-bum]

I posted earlier in this thread that I would be bring an M35A2 heater kit new in the box. I WILL NOT be able to attend the rally, family comes first and I have to go see my daughter in Ohio. If anyone was interested in it please PM and I will see if we can figure out a way to get it to you when you are in the area. Thanks, Mike

 

[clinto]

I'm in for a breaker bar!

 

[neilhendrix]

WoW,, I`ll be on wellfare forever with all this stuff for sale.

 

[islandguydon]

By spotlights, do you mean the type for exterior use with handle, or the type for the interior of a M109? Before I start digging, I need to know what to look for.

CA1517, PM sent on some of your items, headlight, and 18' slave cable. I put a new headlight in, then the working one quit. Go figure. Now works on high beam only. The new one was provided by R Racing and works in both modes, so I'm happy. Just need another.

Exterior type with or with out the handle, flush mount. Thanks Dell.

 

[1crook]

Also have some CUCV stuff.

6.2 CUCV Engine Water Crossover tube. Take off from used engine. $25

The black plastic piece that screws in below the steering wheel in a CUCV, right below the gauge bezel (sorry I do not know the official name for the piece). $10

CUCV blackout light, not tested. $10

Bridge plate, was painted black at some point (not by me) includes mounting hardware, might have screws (if not, they are easy to replace). $10

CUCV Slave cable receptacle. $10

CUCV Heater Control Panel. $15

 

[usmctopgun]

Also have some CUCV stuff.

6.2 CUCV Engine Water Crossover tube. Take off from used engine. $25

The black plastic piece that screws in below the steering wheel in a CUCV, right below the gauge bezel (sorry I do not know the official name for the piece). $10

CUCV blackout light, not tested. $10

Bridge plate, was painted black at some point (not by me) includes mounting hardware, might have screws (if not, they are easy to replace). $10

CUCV Slave cable receptacle. $10

CUCV Heater Control Panel. $15

Dibs on black plastic piece.

 

[flyusn99]

Buy/Sell/Trade

I have several M35A2 parts for sale or trade that I'll be bringing, all came from two running trucks I parted out. Anyone who has any interest now gets first whack:

Fuel tank w/in tank pump and cap
pioneer rack
spare tire carrier assmbly
front window frame w/glass
M23 feed-tray for M66 mount
C "whistler" Turbo
2 bumperrettes

Various other odds and ends. If you need something Deuce give me a shout and I can probably bring it.

James

 

[onegmjack]

Flyusa99 I still want the mirrors,are you still bring Deuce with gunring?

 

[islandguydon]

Jim Henderson in Cheyenne just reminded me I need:

1-passenger side rear view mirror and complete bracket,

1- drivers seat seat belt complete.

 

[wreckerman893]

I'm bringing six gun ring legs.......out of that six I need to keep three for my ring.

There is a fly in the ointment in that there is one odd leg.

You can see pics on the thread I posted concerning the legs.

I'll take 200 each for the three I don't need.......one has an ammo box holder on it.

First PM has dibs.

 

[islandguydon]

Chris "ODDBALL" just informed me I need a complete cab heater package.

I took it for granted this was standard equipment. I never thought to ask.

So I am now looking for the complete package.

I read somewhere someone had a kit. Every nut, bolt and the controls.

I would like to install it when I am there. I think I will have some free time.

 

[Recovry4x4]

Chris "ODDBALL" just informed me I need a complete cab heater package.

I took it for granted this was standard equipment. I never thought to ask.

So I am now looking for the complete package.

I read somewhere someone had a kit. Every nut, bolt and the controls.

I would like to install it when I am there. I think I will have some free time.

You are a glutton for punishment my friend. One of the most irritating installs is the cab heater. I would spend the next few days reading about heaters as there are as many ways to install them as there are heaters.

 

[islandguydon]

I know, I beat myself up every day. I am just looking for the complete kit.

I live in Michigan and for 3 months heat is a beautiful thing. I can install anytime.

 

[onegmjack]

Don I will bring a CD with TM,and a laptop and a generator for Kenny's power supply,for his printer.He mite print you some pictures.

 

[onegmjack]

Kenny will have his printer set up for name tags, I will bring a old printer.

 

[keithc]

Looking for cargo bows for deuce.

 

[islandguydon]

onegmjack

I am bringing a lap top,broad band,a inverter , a 25' 3 way ground fault end.

I will just copy yours. Isn't technology great. Look me up.

ODDBALL installed 4 DC lighter adapters if anyone needs anything charged.

 

[onegmjack]

I don't know if it will copy or not,mite as long as it don't restart over and over, till the redunduts error apprears.

 

[Recovry4x4]

My printer is an itty bitty thermal unit from Dymo. I will have my external HDD and I have a few TMs I can copy over to jump drives if anyone needs anything.

Heater, there are some sources for the M151 heaters. These can easily be mounted in the cab PDQ for heat. After having an interior heater, I'd never go back to the under the hood heat unless it was fuel fired.

 

[Gunnermac]

need a pair of 1" tow bar feet to go with a footless tow bar .