Recent content by bosko

I ordered a few KSE800STU from Mouser and did the repair today and It worked like a charm. I put some thermal paste between it and the heatsink only because i had some laying around. I dont know if its necessary or if it works for this application. Does anyone know why this transistor fails? or...

Thank you!

Power was out due to wind and potential for fires. Mep-803 ran like a champ for 72 hours straight. I got a stainless barrel and used the mfc bung adapter stem so I don’t need to change cans so often. Does the adapter vent the barrel on its own or do I need to do that separately?

Has anyone tried any of the direct replacements for the MJE800G if so which one? I need to order one asap. I did the search based of characteristics and one come close however its all over my head. Mouser #: 512-KSE800STU Mfr. #: KSE800STU Thanks!

My fuel gauge is not working. Something is wrong with wire 128B some where between j7 pin 1 plug under the control panel and the sending unit. There is no continuity. Should I dig in the the j7 plug or just run a new wire? Any help would be appreciated.

M103a3

HI, I have a trailer "power plant" with two 803s and the sinewave / phase syncing load transfer switch. I tow it around with my F250. I turned the lunette on the trailer upside down to lower it a couple inches but it is still pretty high. I have to use a really big drop hitch upside town to...

I’ll send you a PM now. Thanks!

I’ll take 4.

Apologies in advance if its already here but I did not find it her. Is there a source for replacement DC Ammeter (M4)?

My 803 powered my House and Parents house next door for 41 hours straight. Not one issue.

Is the spacer so the float cannot go to the bottom of the rod? I need to replace a couple of mine. As well.

I would like to get a few spares of these switches. It looks like Im late to the party. Does anyone want to get in on another order. Ill take about 5 switcehs.

The load bank was $1,400 for 4 weeks. I only wanted it for one week and it was not much more to keep if the the month for some odd reason. I have some new to me MEP803s to test as I get them running, a a couple 002a that I will get rid of that I have had sitting for couple years and a 005 that...

I hooked up directly to the generator because I’m not familiar the transfer box. I was going to Test each generator individually then afterwards try out the transfer box. I would like to play with it. I haven’t seen a Video of one being used yet.