Search results

How would one go about testing each contact point? Do I just give it voltage at x/y and check for continuity between the poles or is there something different I should do?

Ok so K-1 is out and disassembled and it looks brand new! Doesn't look like it's seen a drop of water at all. Also x/y when contacted with 24v does thump/ clunk

I'm so glad you guys are here and know whats going on! When I tested it with the jumper it didn't do a dam thing. Just sat there like a brick. I'm gonna go grab the machine now and see if I can get it out n try to disassemble it

Yes, I went along with the 24TM. The ac circuit interrupter relay is (4) in the diagnosis diagram not sure if it's k-1... I tested both the switch on the panel (which checked out ok) then removed the top panel from the set to gain access to the relay and tested it as per the TM and as far as I...

When the machine is off?

Hey guys so I start my generator, let it warm up, flip the switch and there and I notice that the green circuit open/closed bulb starts to fade out. I got power out of the terminals and the gauge shows my load percentage. So I puus to test and nothing... I shut the machine down, take the bulb...

Hey guys been lurking in the shadows for a while and decided my first write would be right here in this thread because my experience has been exactly as the title states, chaos!, Well so here it goes... I bid on a 2007 Mep802a with 32 hours on it and kinda bid a little heavy because it was clean...