• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NMerenda

    Wiring Problems - M1028

    Thanks for the info. Ill check it out and get those situations remedied later today.
  2. NMerenda

    Wiring Problems - M1028

    Well the first issue is the (what I believe is a fusible link) in the first picture is fried. I could use a part number or maybe there is another way to "fuse" these two wires together. The second issue is there is a wire with a ring terminal on the end hanging down near the bumper on the...
  3. NMerenda

    Need a part number

    How would I know if I had the ICE/STE? I'm assuming most, if not all CUCVs do not have this.
  4. NMerenda

    Need a part number

    Anyone know the part number for this guy? It's supposedly for the diagnostic wire. On the passenger side it's completely ripped off.
  5. NMerenda

    1028 465/205 combo

    Haha I agree. For right now I'm gonna keep the 400. Would be nice to go above 55-60 but no complaints here.
  6. NMerenda

    CUCV ground help

    I know about the loose wire. It goes to the alternator. Ordered some boots for it already. Ill check the ground connection. Where could I go about purchasing some more ground wire?
  7. NMerenda

    CUCV ground help

    I was poking through some stuff the other day and noticed that a ground has been disconnected or looks to be ripped off. Any idea where it is supposed to hook up to? It is grounded to the frame on passenger side.
  8. NMerenda

    M1028 Axle questions

    Thanks for the reply guys. I'm going to keep the weight heavier just because I'm not going to drive the truck in winter. Mainly going to be for off roading/work. Amsoil severe gear 75w90 is what I'll go with.
  9. NMerenda

    M1028 Axle questions

    1. On the Wiki it says only the 1028 require lsd additive. Wouldn't the 1031 also require it? 2. Do both axles get the additive or is it just the front, and how much additive do I need to add? Is it in addition to the existing fluid or is it factored into the amount the axle requires? 3. The...
  10. NMerenda

    CUCV 14 bolt question

    That's what I figured but figured I'd ask. Plus I agree, if you break any 14 bolt you must be doing something wrong haha!
  11. NMerenda

    CUCV 14 bolt question

    I was poking around Wikipedia the other day and I noticed that that the 14 bolt's design was actually changed in 1985. Here's the link: http://en.m.wikipedia.org/wiki/10.5%22_Corporate_14_Bolt_Differential (in the design section). Does that mean any CUCV made after 1985 has the new design...
  12. NMerenda

    m1028 from texas forest service with a salvage title?

    Yikes. Well congrats on such a great score. Ill keep an eye out for more 1028s.
  13. NMerenda

    m1028 from texas forest service with a salvage title?

    How much did you pick this one up for?
  14. NMerenda

    m1028 from texas forest service with a salvage title?

    Nice looking 1028!
  15. NMerenda

    Buying M1028, 50k or 150k miles?

    Thanks for the info. Duly noted. - Nick
  16. NMerenda

    Biggest tires on an M1028 with stock height

    Those are gonna look great!
  17. NMerenda

    Biggest tires on an M1028 with stock height

    I be they're great on the trail but mud I'm not too sure about. Do you remember what brand they were?
  18. NMerenda

    Biggest tires on an M1028 with stock height

    How are they off road?
  19. NMerenda

    Biggest tires on an M1028 with stock height

    Are those the 33s you mentioned on an earlier post?
  20. NMerenda

    Biggest tires on an M1028 with stock height

    I do like me a tall tire...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks