Search results

have also pop-tested 4 injectors and observed spray pattern when cranking motor. home made 0-2000 switchable to 0-5000 psi tester.

thanks all, problem was first noticed after the over haul when the motor was stopped to readjust the valves. the vane are propped open. so im gonna tear down the ip. the ip was new but old stock, it may have some gum, goo, crap that does'nt interfere until everything expands. otherwise a bucket...

when hot just cranks and cranks but does not have any indication that it wants to start. No puffs of blue smoke, just cranks and cranks, air filter is in the normal setting, also tried with the end of the air filter off. fuel solenoid energizes ip arm goes up. fuel pressure is good with good...

solenoid and ip linkage are going up as per normal when cranking. my concern is no puffs of blue smoke while cranking but fuel returning to tank fine. im trying to talk myself out of it being the new ip. the oil pressure would de-energize the ip solenoid would'nt it ? i'm new to the -002

Heel all, have a mep-002a that will start and run great. blue smoke when cranking starts and can adjust to 61.5 hz. will run and power equipment fine. when it is shut down it will not restart when hot, no blue smoke when cranking. it does have good return to fuel tank and solenoid and linkage...

thanks all !!

installed the governer yoke assbackwards, live and learn :oops:

Hello all, have a MEP-002A that i've overhauled, new injector pump, injectors heads all new bearings, ect. it did'nt work when we picked it up. It will now start fine but imediately revs to 90+ hz with a good fluke digital meter to measure Hz. Wont let it run for more than 10-20 seconds at this...

Hello all, have a MEP-002A that i've overhauled, new injector pump, injectors heads all new bearings, ect. it did'nt work when we picked it up. It will now start fine but imediately revs to 90+ hz with a good fluke digital meter to measure Hz. Wont let it run for more than 10-20 seconds at this...

thanks

hi all, have a mep016D, when in the 120v single phase mode, can only get 55v at convenience outlet. 66hz any thoughts would be appreciated. fluke digital meter. thanks, Joe. Also how is the curent transfomer supposed to be wired.