Search results

will do, appreciate the direction

I appreciate the information I have downloaded the TM's and will figure it out.

Yes, when I start the unit and let go the AC volt gauge and hertz gauge drop. (The motor runs great) I pulled the batteries out of the shop off of the trickle charger to start up the gen so yes the batteries were 100%... The DC control circuit breaker Is not bypassed and I do have 24 VDC on...

Ok. This gen has been sitting since January. I do not use it but I am not willing to sell it with a known problem. I put the batteries back in and it fired right up. Love real motors without all the emissions crap.! Now to the issues, as I know them. Start it and hold the switch up...

never been to Germany before...!

I will take some time and follow. it is cold and wet out right now and this is definitely not a priority. I do want to get this dialed in though and I really do appreciate your assistance. The light didn't use to be on all the time so I am thinking something happened. I was running it and...

Ok. So set off, S2 in the run position. I put s7(Battle short) in the on position. The DS7 and (batt;e short light) and the circuit breaker light (DS6?) comes on. I did test output and it seems as if the breaker switch is working. but the circuit breaker light is on when I open or close the...

Could it be that the switch to turn the breaker on/off has gone bad?

Do you want me to flip the switch to run and not start the machine? If so the circuit breaker light does not come on. It illuminates as soon as I start the unit, and release the start switch. The circuit breaker light extinguishes when I turn the unit off.

I turn the start switch on and low oil pressure light is on. I start it and well I just started it and the reverse power light is not on but the circuit breaker light is. It dosent turn off…. I have a gremlin…😬

Sorry I used the heading as description. The circuit breaker light will not go off and the reverse power warning light is on.

was to test between wires p62h18 and p61A18 I did start a new thread not sure what is better.

I followed along on generatorshawn's post as it seems identical except for a couple of the readings. I have no cables attached to the machine. I can not use the battle short to close the circuit breaker. I am not running in parallel and I have flipped the switch a couple of times to confirm. I...

I don't know if the 005a and the 006a are the same test procedure but I have gone through the same steps (with the same problems) and I have the same results up to this point. On K14 I have 4.9 between pin 5 and 6. I also do not have any wires attached at those locations. I did test 5 to...

I really need help getting this thing figured out. If anybody has any suggestions or if there are any mechanics that specialize in the MEP generators in the Seattle Washington area would love to hear from you. Thank you in ad vac for any help

I have procured a MEP 006A, I need help with voltage adjustments. I know that you can adjust the hertz with the throttle but when I get it close to 60hertz the motor starts to hunt. The knob below it that is supposed to adjust does nothing. Am i missing something? I would love to talk to a...