Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Using the throttle/Hz adjust knob to fine tune the Hz for varying loads is ok. That's why its there. Where you can get in trouble is if you use it to idle the engine down for some reason.
So I just went out to check. My 8/11 build date un-fielded unit with 28 hours (which I got from LITD with 7 hrs) indeed has Lister Petter marked valve covers.
My 7/09 build date with 702 hours (which I also got from LITD) has Onan marked valve covers.
I've been checking out WAGO connectors and have been wondering if any of you have an opinion good or bad, or if anyone has used them with a good or bad result. They've been out for quite a while but I've just stuck with wire nuts. There's plenty of stuff in forums and on youtube, both good and...
I have used all 3 of the following Datcon gauges. All have worked perfectly for me with the senders that came on my 802a. I bought a second of each for when the Beede gauges fail on my NOS 802a. There are also 24v light kits available from the same vendor.
Fuel - 101584
OP - 101574
Temp -...
I have a similar OCD. I bought a second 802a from LITD as a backup thinking it was cheaper than buying a bunch of spare parts. Although it was in very good condition, I had to make everything as perfect as possible. After all that, I have still been stocking up on spare parts.
Makes sense. So if the person whose generators were lost accepts the shippers scrap price offer, then the shipper can head on over to the LAF trailer and do whatever he wants with the generators? You'd think they'd check the LAF trailers along the route for the guys missing stuff before they...
Yep, sadly we've somehow gotten to the point where criminals are "victims" and are not to be prosecuted. Those that they steal from are somehow the cause of all the worlds "problems".
Hopefully your 2 units will be found as LITD's 803 was.
Has anybody ever used a soft start on a 3/4 hp single phase 240v well pump? I have recently installed a 48v /4400w Magnum inverter backed up by 600ah of LiFePo4 batteries. The system works great powering critical loads in my house. Next step is solar panels.
The issue I am trying to solve...
Thanks Kurt. The 2-wire standby mode simplifies things because there is no "run" sense signal required between the Gen and the controller. The inverter senses the incoming AC voltage from the gen and communicates that to the controller. The controller accepts this as its "run" sensed...
Kurt,
Quick question. Does your 2 wire auto-start work with a start command derived from a constant on signal from an on/off switch or relay (closed circuit = on / open circuit = off) or is it a momentary closed circuit to command a start and then another momentary closed circuit to command a...
Found one!! Great price too. Got the 4448PAE, the interconnect panel, remote, BMK, and auto gen start module. Only things still on back order are the PT100 charge controller for solar and the back panel that the inverter and interconnect mount to. Very happy with the price. About 50 bucks...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!