Search results

Get a camoteksystens.com box and be done with problems... and put new glow plugs, or at least good ones.

Camoteksystems.com box....only way to go.

I might have one.

see pic

Right side....take the 2 wire harness bolts out of the heat shield, and the rear GP...bend or remove part of the heat shield.....front :remove air cleaner housing, and move water bottle.

Two wires with yellow marking should go to back battery pos. terminal to feed breaker and relay....also relays do get stuck on, or off.

The pump is usually the first thing to fail.

AMG made a bunch of M11xx trucks for a desert overseas country that have the viscous system .

Army trucks...Fast Marine trucks......slooooow paperwork.

Air gun install....over tourqe will deform first 2 threads. HPG sells the aluminized coated ones.

There are 2 different hatches..steel gets a 12339595 seal, and aluminum gets a 12480634 seal.

Same diameter.

Remove it....it was for the electric turret.

3 different shafts....

I called Niehoff January.....asked about remanufactured regulators for 200 amp.....tech line said they never herd of them.....they are a potted build.

Those pictured tips are for the skinny steel whips.

... There's no relays behind instrument panel...only circuit breakers. That 1097A2 has a relay behind battery box inside of panel which is 24v activated and routes 12v to trans computer...relays do stick on sometimes with Ignition turned off. Trans light forward of shifter turns on when...

I have a tester for pcb's, tsu's , gpc's, All style start boxes. Ship one to me..I'll test for small fee.

If your box is bad...you could burn out the new plugs.....Sometimes TSU is the problem, but mostly the box is what burns out the plugs.

After awile, those switches get a bad spot inside....sometimes adjusting helps it inside on contacts.