Search results

My truck has the hand throttle plus a throttle stop. So you pull the hand throttle all the way out and then adjust the stop to get the correct rpm. The stop is what I'm having problems with. The stop has to be disengaged while driving, it really messes me up when I get a block away from my house...

I know this is probably in a tm somewhere, but I'm having problems with getting my Pto driven generator to operate correctly. The thing is setup to run at 1150 rpm in 5th gear for generator operation. It has an over frequency relay connected to the fuel pump shut off that kills it when the...

I'm having trouble locating operating instructions for the vernier throttle in my m-944a1. If anybody can point me at the correct manual it would help me out. Thanks. **** thing is tricky.

Are there any TMs that have information on this? I have been looking and am having a hard time finding one that includes this model of SEORTM. It already has a boom that extends out of it, so it seems if you have the boom extended it would get in the way. I don't know though , so I figured I'd...

I kinda thought that's what it looked like. I guess the smaller ears where for storing the a-frame. I haven't seen any pictures of one with it in use, but it makes sense. Lifting the rear section up to access the work stations at the back would be much easier with an a-frame. Guess it's time to...

Does anyone know what hooked on to these attachment points on top of truck? I'm not sure if they are just lift points for mounting shop on truck or if there was something that hooks on up here. Also driving this thing around with the roof off and windshield down is a blast.

if you take the heater and fresh air controls loose under the dash and under the hood(it's easy just follow the cables) you can get the dash panel out further and not mess your hands near as bad.

I just got through putting a new set of xzl's on my 5-ton, I removed the lug nuts and then lowered the hub back down back down just a little and wiggled it off pretty easily. Same thing going back on , got wheel lined up on hub then used Jack to lift the the axle back up until the wheel fell...

Is there a way to get transmission to shift without running up the rpm with the pto engaged? My m944a1 has a Pto driven generator, it operates at 1150 or so rpm in 5th gear. So far the only way I have found this to work is to run it up to about 2000 and then back it down. The only problem with...

I thought I had heard the xl's where bad about coming apart internally. Looks like I'll be going with the goodyears. Thanks for the input.

M944a1

Are these tires intrrchangeable and is there anything wrong with the michelins? The place I'm looking at buying them from sells the michelins cheaper and I was wondering if someone could shed some light on the reason for this.

It wouldn't be bad with straight pipes running down the road, but using it to power the generator gets a little loud.

I recently bought a m944a1. After seeing this site come up so much in searches about things for it I figured it would be a good idea to join. My new toy runs great but needs a few things replaced and a few things modified. I got a few questions that I figure this place could help with. Yesterday...