Search results

I ripped out my stock air wiper motors, and ordered two 24v electric universal units along with some new wiper and wiper arms.

They are your generic chinese led bulb, 1156 3014 24-EX Chipsets I got them on amazon, but I found them cheaper on ebay. It was $17.99 for 10 so 1.79 a bulb wasn't bad. I dont know the longevity of the bulbs, I just looked at the amazon review and seems somebody already has them in there M35...

I converted all my lights to LED yesterday, so much brighter! Then power bled the brake, And did a oil change then installed spin on filters. Then found my fuel line right after the first filter was crushed down so much when I saw it I was wondering even how the truck was running? Stock bulb...

Looked at it longingly as I drove past going to work, hoping for a day I can get the spin on filters on, and bleed the brakes so I can get it inspected and driving....

Found the switch! It was the map reading light! they replaced the lamp with a ground down bolt that was glued into the cap and rewired the socket so you turned it out a few turns and it cut power to the relay module. I'm putting my EGT gauge there so not a loss.

Finally got the SF97 in the mail today! Time to....work on my jeep since the transmission just stopped while coming home from work today....:-( Guess I'll go to AAA next week :-(

I did when I to pick it up and there was fluid, I didn't check to see if it was dot 3 or 5. Now we did have to tow it, so brakes weren't needed on the deuce anyway I'll pop down there tomorrow morning and check again maybe its level is lower.

And I got it running! Got home from work and found the package from ambac, it was ripped open but I found the clip on the stairs up to my porch hurrah! When I got down to the truck it was already 18:00 but by 20:00 it was running great, till I found out about the poor mans security system...

Wow! did the hub fail, or was it the rim?

Well the spider didn't come in yet so probably monday, right in time for some more snow :-x I took some pictures of the button, Do most pumps have the 01 button? Mine is stamped 03, from the pictures of other thread about the HH and etc I see a few of those buttons are convex on one side and...

The polish section, is polished but one section looks alittle off centered like the spider held it in place but off at a angle till I pulled the HH. I cleaned the button and the hold that goes threw it was clogged with crud, so I'm guessing the button's wear surface lost lubrication. I bought...

I'll get a better picture of the button, the bottom with the slot looks fine but the top where its concave looks like it has some metal to metal contact that polished it. Unless it was polished already.

Salty jeeps Test light set View slots Very stock with ether shot HH with injector line

Well I tried to take off one of the door decals, heatgun and plastic scrapper, and ended up taking off the paint. now I have to get out my vinyl cutter and make some crazy decal to cover the missing paint. "sharknado defense command" "MPG reduction force: for every gallon your prius doesn't...

Well It was a 12 hour day today, but I have it at my storage yard. There was some digging going on on my road so we had to stash it there. Many many thanks to Dillon and his wrecker! But left my place at 08:00 got there at 10:15 and signed for it and went back to the lot, and it looked great...

Wow that bag mixing idea just seams like a recipe for disaster, I just use a cheap 2 gallon plastic bucket with a drill mixer and then pour a little solvent on top and put the lid on it to keep it fresh while I'm rolling it. Atleast the spraying with the gun looks good I typically roll it.

Mix in a bag? where is the video? I just mix it in the gallon cans it comes in, it gets close to the top but its alright if I dont spin the drill mixer to fast.

They actually make tintable bedliner called monstaliner you can spray it with a undercoat gun. I used it on my VW rabbit pickup in forest green, went on great just with a roller. And you can get in OD green I have two gallons in OD to use on my baja bug and deuce in the summer. And a few...

I know! I was quoted $2 per car $5 per truck and $10 for tractor there are alot of tractor....

All the filters Grabbed two batteries at rural king, pulled two 5 gallon buckets of rotella out of the shed. Got a pile of silicon orings for the HH, got a piece of 3/8 dowel rod, Pulled 15 feet of link belt out of the mechanical supplies shelves. Grabbed a bunch of pipe fittings off of my work...