Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Im due for an oil change and I usually use rotella 15w40. The guy I work for has about 500 gallons of cheveron 40w oil, CSX used it in their trains. Ive looked it up and some people say it wont matter and others say dont use it. Just want to know if anyone else has any input.
Yes it only does it at max fuel pressure. Also after about 2000 miles I have to add a quart of oil and it doesn't leak so it must be getting burnt somewhere my buddy said maybe because for a while my high idle wasn't working all it was was it came disconnected but since I wasn't letting it warm...
I have a m1008 with 20,xxx miles on it and when towing my utility trailer down the interstate at around 55mph for about 1 minute I will loose power and it looks to be bluish smoke pours out of my exhaust, if I let off the accelerator it will go away but if I go back to 55mph it will do the same...
Good news I went and checked all the connections and the blue fuseable link was loose and the wires above the gp solenoid. I cleaned all terminals on buss board. Now starts up like normal front battery has 14.7v and back has 13.7. I put the conector back on the temperaure sensor, and when i...
I know a little bit as long as its fairly straight toward. My buddy is real good but he's gone this week. So ill do as much as I can till he gets back.
The front battery is 14.56, and the back battery is 11.16. When I bought the truck it started fine now it drags when its starts. There also is a problem with the glow plug system. It works fine in the morning when you first start it but once it is warmed up the "wait" light would some times...
My passenger side altenator is producing 30 volts, so i purchased the rebuild kit from cucv electric. I just purchased the truck and the altenator looks brand new. I know its supposed to be an isolated ground altenator i was wandering how to tell if it is an isolated ground altenator. I dont...