Search results

Same

Would be nice to have a spare or two.

Turns out my load bank has too set of references for the Kw switches....one for single phase and another for 3 phase. When I thought I was running 15kw I was actually runing 12

I added a Kohler ATS to my house....works great.

Anyone have any tips or idea how to remove the filter from an MEP803a. It really is stuck on there.

Turns out it was/is the shut off solenoid sticking

Update. I changed the VR and added the quad wind fuse. It is working as good as new. Thanks everyone

Ran it under load...bluish white smoke burned off. But noticed injector 1 might be sticking. Going to run some cleaner with the fuel next time

Thanks Ray We just. I’ll run her tomorrow and post some pictures. I also have blow by coming out of the oil filler 😢

Wouldn’t the overload trip and shut down the generator? Putting 10kw on it takes the percent meter south of 80% on every 803 I have.

222hrs. I don't think it wetstacking.....because i don't see the usual black specs flying out. But I was going to top off the coolant and do just that....to see if by chance its burning coolant. to get it to 75% I'll have to run over 10kw load...probably close to 15kw

This machine started giving me issues a few weeks ago when it would only start with Ether...then it would run fine. But now it wont. I'm guessing its a fuel issue....was going to start at the filters and then pump. Any suggestions?

I have an 803A that I bought several month back and it ran fine. I can't remember if I load tested it or not. It starts right up and sounds great. But when I put a load on it...it started to smoke a lot more than usual. Steady smoke....bluish white. take the load off....smoke goes away...

Update. So I took the top cover off. The S8 switch looked perfect and clean. But I still sprayed it down and manipulated it back and forth. Over voltage would go away on a couple starts, then it would come back. Sprayed it down some more and it seemed to be working properly without the...

I’m think I’m going to tow it back to my house to give me something to do during lockdown.

The Box that bolts onto the genset with all the gages, regulators etc. 6110-01-397-2112 CAGE 60177 PN 88-21577 Control Box Assembly , 30kw

So today I drove out to where I have it stored. Started up...and again, shut down due to over voltage. I had my meter with me this time. I started it up and flipped the battle short for it to stay on. I checked voltage at the convenience Outlet and lugs....both less than a volt. Even...

I believe it is.....because I starated it when I received it. I added fluids....started right up, rand for a while and I shut it down. Yesterday I went to start it to put a load bank on it, and it would start and shut itself down. Nothing has been manipulated since I received it. I'm...

I haven't looked at the TM yet. I was just on here making a different post and figured I'd ask away. I have an 803A that I purchased over a month ago. It started and ran great. Yesterday I was going though my generators, started and ran this one....but it started and turned off and...

I have an MEP806B Genset that ran great a few months ago....then all of a sudden it stopped. I can still start the engine but everything else was dead....and my cousin took it all apart. I have a brand New 805A control head that I purchased....even overpaid for it. Would this be a drop...