Search results

After the truck has been started and warmed up and then you shut it off and let it sit for about 1/2 hour , it will not start unless you give it a shot of starting fluid. When the engine has set the 1/2 hour, and is still warm, the "wait" light does not come on. Anyone have any suggestions or...

This is the piece with the spline inside it used on the front rockwell 2 1/2 ton axle. I need two of them. Email me price shipped to 45056. Thanks, Chris

I am having a truck sandblasted and was going to use POR15 on the axle and frame. Now I am considering just using the 2part epoxy primer(recommended under CARC) by Sherwin Williams on the frame, axles and body. Then Painting everything CARC. My Question would be is the 2part epoxy primer just...

Bought a nice Medium tow bar, with tow bar ends and tow straps (the ones with the double chains).Had all the correct pins with lanyards. Paid $300. Best of all no shipping. This thing is heavy. Was this a fair price on this ? :?:

I am installing a locker in the front. I havent figured out how to remove the axles. Please lmk how you do this? :?: I have taken wheel, hub, and bearing nut OFF. The back axles and locker went pretty good. Thanks Chris

I will take a XXL. :D

Chris, I have a couple, but there are people walking in front of the vehicles, dont think they will be good unless someone is really good at editing them.

Carc shirt would be my vote. Maybe we should plan on getting a good group shot of the vehicles this year, for the shirt next year , if freds picture of the trucks is to small or is not acceptable. I like freds pic though.

I am going to have wheels made by stazworks for an m715 with rockwells. I would like to have them to be interchangeable with my deuce, should I go with the singles on it. Optimum for the M715 will be 10 x20 with a 6" backspacing. Will this size fit the deuce without problem? Thanks Chris

That short ,fat guy next to the bald ,fat guy sure is ugly. :) :) :) :) :)

Bought an Ouverson Eng. locker. Its machined out of a piece of 8620 billet steel. looks great!!! Here is the link to the locker and other rockwell items. Randy (the owner is a great guy to deal with.) http://www.ouversonengineering.com/axle_products

These are the various plates used to hold the springs on the front axle. I do not need the ubolts. I need another set like what you see. If you have some LMK what you want for them or if you know where I can get some LMK.

Yep thats me. Heres the ad: Smooth/quiet running motor, it is smoking a little, dont know if it is running lean or burning oil. Carb has been rebuilt. Vehicle sat on drive way for 2weeks and did not leak anything. Two new batteries.New 3lever light switch Has a new aftermarket fuel pump(still...

I have a whistler turbo off of a Hercules will this bolt to a LDT465 manifold ? will it work on anything else? Thanks Chris

A local guy has some Rockwells on a non-running deuce in my area. I need to know if they are the "U-joint" type. I tried to fill behind the rubber boot, But could not get my hand behind what seems to be a flange on the end of the axle tube.. It is in a 1970 model. The data tag says Rockwell...

I want the ones with the U-joint in the front axle. I need one front and one rear. I have M715 stuff to trade or cash. email: elohimfirst@msn.com Phone: 513-523-4918

Can I hook a 12volt Hydro pump up to my M1008 truck without great difficulty? It is 24volt. Thanks in advance.

New to these and have a couple ?'S. 1)Are all the 6.2 s the same in these ? 2)Are the banks turbo's a good upgrade and are they fairly easy to install? 3)How much lift would I need to clear 44" tires ? 4) Is there a Detroit locker in the rear of these ? Here is a link...

Someone in my area has these in a 1986 ford telephone comp. truck. It has 99K miles on it. The truck has a Hyd. winch on it also. The boom has been removed from the vehicle. The truck is very clean. I believe I can get it for about $3500. I was wandering if the motor and tranny could be made to...

Saturn surplus is out of these pumps. All the other sources I have found are about twice the money. Saturn sold theirs for $36.50. Does anyone have another source for about this price? I would like to have one.