Search results

how could we get hold of them if they are selling carc that cheap can any one but it and have it shiped to east coast maine woutld it be cost effective

by the way if you find out your rester is bad i have one i will sell cheap i did 12 volt convertion dont need any more

my truck was doing that cranking over good volt meter move heard relay clicking but truck still wouldn't start middle of summer found out with simple 12 volt test light no power out of relay put new one in truck started up never been an issue sence start simple start basic make sure power out of...

also look at tire balance and like said bent rims try tires first and they are load rated for the weight you have .might be just a bad tire to

take your inspection cover off with a long screw driver pull the bendix out see were it is hitting the flex plate may need to take shim out to make the gear hit deeper in the teeth will take a while but keep tring when i put neww starter in i had to file the starter housing to get the right mesh...

sounds great i will be there will just need to get dirctions on how to find your place and if you pm me with what we could bring to help out with the cook out and fire hahahah fire hehehehe fire

sounds real dumb but are you real sure you have fuel in tank i would try putting 10 gal in just to be real sure try simple simple first then move on . but might have lots of water .try cranking with little starting fliuld to see if fires .

yeas ago i put bucket seats in my 79 k20 pickup the sats were out of buick car 3bolts jumped in had to make small mod for last one the front left was the only one that did not fit .so drilled hole in floor put large whasher and nut under floor same on top with treaded rod then put nut whasher...

i as well have a manuall tire changer . when it comes to balance i use equal in my truck tires . yes my 235 85 16 works great put it in done everthing is smooth .

fuel filter and at them temps you should be sure to have put aditive in fuel power sevice or someting try power serice 911 with the fuel in tank .really shouldnt be that many miles between fuel filters should be every oil change do feul filter .really importdent in winter months .

The best thing to do is like I did is put a small little light on the glow plug side of relay so when the relay itself shuts off thats when i try to start the truck .I always always cycle twice maybe thee times in real cold weather starts every time .

A friend of mine has a mog and was wondering if the cluch can be adjusted at all or if it needs to be replaced . what it is doing is grinding going in gear at a stop but going down road seems fine but going in and out of reverse it grinds . any thoughts would be a help I didnt know if it could...

well my m1010 is still the old set up one alt on top of the other and they were the lessnevilles so when i did my convertion i had to put lessnevilles back on they bolted in mine are 160 each . but if yours are the one one each side the 100 amp acdelco old style gm will bolt in go to any good...

i almost forgot the blue box from h ll un hook wires tape up ends tuck out of way forget about them

well i did read that artical great artical but it is still easyier to get new alts ,starter do away with restor on fire wall move on . hook alts to the rights batts new gauge dont look back . like i did mine two new alts direct bolt in run couple new wires for alts done no issuses since . very easy

well boys and girls i am going to get every body all fired up but owell . been reading about convertions last few day even look at that rosman fire equipment site. but when i did my convertion put to new 12 volt alts bought napa 100 amp gm off the shelf bolt right in . now hook one 8gage wire...

well boys i have been following this tread alittle to do a 12 volt convertion go buy 2 100 amp 12 volt alt any good part store well have got mine at napa put in trow restor on fire wall in trash hooked two wires together put 12 volt gear reduction starter in move on very simple have not had any...

i will sell you mine i converted to12 volt so it is off the truck now trow me a price you owen it pm me or email me at shon@allenstransfer.com

were can one buy a mil spec light bulb does any one have one that can be bught

well boys i did last weekend finding my no start promble it turned out to the glow pug relay it was clicking and every thing light come on and all but no power coming out finlily had time to check thing out by pass relay cycle key two times fired like summer tried it day later samething so put...