Search results

Us and rhino are in route. Eta 90 minutes from now.

We have the XZLs, and the most amazing thing about them is with NO weights there on stock A3 rims there just perfectly balanced!!! Truly unbelievable.

Just stick out yer head and holler

We offer encouragement and hope you press on, Pintle should be good.

We’re gonna be coming from Tulsa and seen where someone said a convoy from Waco, we will probably be in the camper towing a hmvee, Friday afternoon works for us unless the crazy roosky goes chemical or nuclear?

That was a real concern of our to have and be able to steer if there was a breach in the hydraulic system or a engine failure of some type. That’s why we went the way we did. We have friends who are diehard rock crawlers and they use the popular hydraulic ram steering system, any failure of the...

We made a steel backup plate for the box on the frame. Called a semi truck wrecking yard. Told the gentleman what I was looking for and he call back sent some pictures and sent us a pitman arm that worked fine. Our total cost was about 10-12 man hours, about $450 for the box, $25 for the pitman...

We’re very interested and long term planning for it.

We would be there

Sorry didn’t make it clear, 1 1/4” narrower?

We got rid of the Cits? System, installed the 53” tires, cut down the headlock so they were 1 1/4”? and used sealer on the o rings and valve stem mount No leaks in 4 years.

Red tops at one time lasted years, not anymore. Trust me. But a good battery with a good replacement National warranty.

Simple one wire 24 volt(28) 60+amps easy and done

And we went to haspin once, KAMO several times. We drilled the tank so when you top it off, it’s topped off, drive now or that fuel will warm up and start oozing out.

I know that no one is going to believe this but I put 53” on our A3( spread the axles of course) but we get 13 mpg, better than our hmmvee.

I really hope that your NOT trying to put power steering fluid in it. Hydraulic or a cheap atf fluid is what you should use. Mixing power steering fluid and the hydraulic fluid that is all ready in there wil make the steering sticky and shaky. Then in a short time your seals on your fan clutch...

I R gun is cheap and useful, we have DX 3 in ours and it is unlikely that the gage and the pan temps should be more that 20-30 apart, “Probably “?? a bad gage or one that’s good but just reads a little off.

Used a lot of penetrating oil a very good “3/4 impact wrench, high volume 175 psi compressor and sometimes a torch. Yes there a bear. If you have a dotco type grinder every time I mess with A-3 wheels I hit the threads up about a “1/2 from the nuts on the studs. Because if a nut loosens that...

Just get a 24 (28) volt one wire alternator, with the expected amp Draw, easy pesy