Search results

Can your truck do this? Ok, I have only ever driven my truck, it’s an m52a2 with the 5 ton multi-fuel, it’s after cooled the injection pump is adjustable on the fly by a cable on the dash and the waist gate on the turbo has been blocked off. I have checked the accuracy of the boost gauge with a...

900 series fan clutch on a LDT deuce search it:)

The adapter is very simple to construct, the costly part is the fan, you can buy a junkyard fan with clutch for $50-$75, but then you need to replace the clutch b/c it is 15 years old, new clutch is $65. So its going to cost you about $30 for the adapter and new bolts, Project total will be...

OK, finally here on the pictures. You all made me worry that it might be out of ballance by welding, so this is how I re-did the clutch. As you can see there is no welding, I made the adapter by using a washer and a center bolt from a leafspring pack, and a 1 1/2" set coller. As for trimming...

I just installed a viscous fan clutch on my M52A2 Miltifuel yesterday, Took the stock fan off, went to a local junk yard and looked around till I found a match, the bolt pattern was right but the pilot hub was not, so I measured the hub = 1 1/2" bought a 1 1/2" set collar, welded it to the hub...

Check this out, http://www.steelsoldiers.com/5-ton-up/43109-m52a2-aia-air-intercooler.html I wish I could take credit, b/c he did a great job on it, with all the other mods I have done I get a 300 degreze differintal between the air going into and coming out. Very Impressive. By the way I...

Pulling a load I maintain 25 psi of boost. My truck has a Intercooler installed and it makes a huge difference. I never let the egts go over 1200.

All the different ideas on here and no one has thought about the down pressure on a turbo charged engine. While reving under a load my LDS 465 1a has 10-25 psi of boost, soo the turbos drive pressure is at least 20 PSI. with this pushing down on the piston all the time either boost or drive...

Will do, give me a day or so.

I have a 5 ton with a multifuel, it has the od transmission in it. I want more gear options but dont want to replace the Transmission. Im thinking of installing a air operated High/Low with a fliper on the shifter, like a big truck, any ideas?????? Thanks

Check this out http://www.steelsoldiers.com/showthread.php?t=56010&highlight=fdc+fly

[ I've run up to 90% WMO and I've never gotten smoke like that. What am I doing wrong?:roll: on my truck I have reworked the fuel density compinsator AKA (FDC). I have an adjustment on my dash to control the max fuel on the fly. I just adjust for the load, tempature and type of fuel. All I...

I get the white smoke until its up to temp. Then its gone.

Yes the more oil the blacker the smoke, on stright #2 the smoke is a dark gray. I have run 90% umo, with no problems, @ 90% oil all you can hear of the motor is the fan, its very quite and does not have that normal knock to it. The only reasion I had only 50% is b/c I was given some free...

UMO works great, I have run about 150 gallons. Just watch:)

Try this.

With the overdrive trans, @ 53 mph it was right at 2k rpm

Sorry try this

OK well here is the video, the truck made me worry at first, pulling the 9K pound empty trailer it topped out at 53 mph. with the 30K excavator on it it topped out at 53 mph, go figure???? It could have pulled a lot more, the brakes worked great, and the air pressure never seamed to drop. In...

Lake Placid, its in highlands county