• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    What have you done to your HMMWV today/lately

    Shout out to @belted_guns for a 3d print for the @Augi Vic-3 Bluetooth adaptor to properly mount and secure the box!
  2. T

    Help, VIC-3 to non military radio

    Bump, looking for a solution to connect up a baofeng to Vic-3
  3. T

    IBIS tek HID to LED conversion

    HID is just old - heavy electrical draw…. Less reliable. I also don’t have a need for the infrared which I’d like to replace with flashing lights.
  4. T

    IBIS tek HID to LED conversion

    Has anyone successfully modified the IBIS Tek HID light bars and convert them to LED? I was just curious if anyone had attempted or succeeded at this. Bypassing the ballasts and re-wiring would not be super difficult. I’m more concerned about finding LED’s that would fit with as little...
  5. T

    current Rhino/Rico spare tire carrier value?

    I see most go for around 1500 in decent condition
  6. T

    What have you done to your HMMWV today/lately

    UGH why don’t they sell with the armor. This makes me giddy (don’t answer this… I know WHY… I just don’t know why, ya know?)
  7. T

    HMMWV Control Box issue - temperature affects starter engaging

    I HAVE! Wouldn’t use anything else!
  8. T

    Power Steering Pump Pulley Removal

    My dad had a puller but we didn’t have the clearance to use it. This looks more low profile. Might work. Hammers work for sure! Ha
  9. T

    Power Steering Pump Pulley Removal

    I just dealt with this on my 1165. I first removed the belt, then took the bolt off the front of the pulley. Then the fun…. HAMMER turn, HAMMER turn, until she comes loose one millimeter at a time. I beat the crap out of my pully and when it finally came lose I washed it down, used a dremmel to...
  10. T

    Transmission cooling loop fitting wiggle

    The cooling loop goes to the oil cooling stack. The power steering gear , break booster, fan clutch, ps reservoir all loop to the cooling stack. There are 4 total connections to the cooler. I’m not sure if fluid flows freely to the other part of the cooling loop for transmission/transfer case...
  11. T

    Transmission cooling loop fitting wiggle

    See attached from TM. It is part of the transmission cooling loop. M1165A1 SN 258XXX
  12. T

    Transmission cooling loop fitting wiggle

    I’ve been trying to get at the root cause of air in my cooling / power steering loop and while replacing all of the hoses I came across the transmission cooling hard line is loose and wiggly and I’m not sure if this is normal and could possible my the true culprit. Check the video and let me...
  13. T

    What have you done to your HMMWV today/lately

    Installed the tractor supply floor mat special throughout the truck! Cutting these mats down to size is a PIA but worth it!
  14. T

    iBis Tek incandescent light bar kit for Humvee?

    I have the full kit brackets and all... just waiting for me to get the rest of my truck in order before putting it together!
  15. T

    Cadillac Valve & TDM Keeps Burning Out

    Following. About to drop 300$ on hoses for this dumb fan set up. Would totally go with @Retiredwarhorses solution. Have an 1165a1
  16. T

    Silver box connected to power steering/transmission/rear diff cooling system

    I’ve been out of power steering since I got the truck, air in the system. Going to start a hose replacement rampage because the system is so complex… power steering, break booster, fan clutch, transmission, rear diff and transfer case cooling are all connected on this truck…..what could go...
  17. T

    What have you done to your HMMWV today/lately

    Last time this truck was clean, Bin Laden was still alive lol
  18. T

    Insulation behind front evap M1100 series

    Negative. Are you going to be cutting your own piece of insulation? I’m severing how to put it back. Once my heater goes up- no chance it’s ever coming down again.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks