Search results

1-60 PSI Tramsitter The 0-60 PSI Transmitter is MS24538-1 (MIL-SPEC MS24538) Transmitter, Pressure, 24 Volt DC 60 PSI. MS24538 attached.

Color Kind og bogus also that the Silicone brake fluid is supposed to be the color Purple to help identify it, but that it can break down to a yellow or amber color that would lead you to think that it might be another fluid (DOT 3 or 4). Doesn't seem very foolproof. Just my thought but the...

On both the 0-60 PSI and the 0-120 PSI gauges, the ribbed connector MS33800 Style 2 should be connected to the SENDER (Oil Pressure Transmitter). The smooth connector MS33800 Style 1 should be connected to the IGNITION (24 Volts DC when the ignition is on). If you hook the gauge up wrong you...

MIL-PRF-46176B versus commercial DOT 5 brake fluid The MIL-PRF-46176B fluid is slightly different from commercial DOT 5 silicone brake fluid as follows: Excerpt from the MIL-PRF-46176B specification- 6.1 Intended use. The brake fluid covered by this specification is military unique due to the...

Source for MIL-PRF-46176B Silicone Brake Fluid IRIS Industries Iris Industries, Inc is on the Qualified Products List (Government qualified) for the MIL-PRF-46176B (was MIL-B-46176) silicone brake fluid used by the military. You can buy direct from them in Quart or Gallon sizes. If you buy...

Filter threads Excellent thread on this issue. I got the filter mount NAPA 4770 (WIX 24770) and the filter NAPA 3405 (WIX 33405) from my local NAPA store (both in stock) and installed them per this post and it came out great! I called the WIX technical support line; the filter blueprints show...

Ribbed connector The ribs on either the connector or the gauge according to the Military Specification for these items denotes the the positive voltage connection for both items.

It looks like all the confusion regarding whether the truck was commercial, had airbrakes, was registered Historic, etc has been removed from the 2011 edition of the California Vehicle Code (CVC) and you need a Class B license to drive it in Californis. The M35A2’s unladen weight is over...

PS PS I've got an early 80's M35A2 w/o winch and the mod was not done on this truck.

Mod order There must be a Maintenance Work Order (MWO) or other instruction (Depot level modification??) that has the detailed parts and mdification work detailed on how to do this modification. I'm guessing an MWO tag would have to be added to any modified truck to alert maintenance folks...

Vin Hey, I forgot. This truck should still have the original A2 VIN stamped on the frame, if I remember right it should be on the foreward frame drivers side.

Truck year Contract no. DAAE07-93-C-R110........ 93 is the year the contract was let/signed which is 1993. Since the truck cannot legally be bought by the government until the contract is signed your truck should be 1993 or newer.

Thanks Thank you both! I guess I'm kind of stunned that folks report that the silicone brake fluid which is supposed to be a purple color has actually turned an amber or yellow color on them over time (too hard to argue with facts and reality). Your input is much appreciated. I'll try the...

1982 M35A2 bought from the government thru government liquidation. Brake fluid in master cylinder low, plus leak at one of the rear wheel cylinders, so I need to fix wheel cylinder leak (possibly bleed) and top off fluid. There is the usual MIL-B-46176 sticker on the underside of the master...

I needed these quite a while ago, called around quite a few places as well as checked with some of the OEM's and couldn't find any. I think the outlook is pretty grim.

Troubleshooting steps from the tech manuals: Problem: BUZZER DOES NOT SHUT OFF AND AIR PRESSURE GAGE READS BELOW 60 OR 65 PSI. 1) CHECK AIR RESERVOIR DRAIN VALVE UNDER LEFT SIDE RUNNING BOARD. FEEL IF DRAIN VALVE IS LOOSE. TIGHTEN IF LOOSE. 2) CHECK BOTH REAR AIR COUPLING SHUTOFF VALVES. MAKE...

A 12-point socket doesn't work to take off nut on the companion flange on the transfer case. The walls of the 12-point are too thick to fit between the nut and the inside wall of the flange. NAPA sells a 1/2 inch drive 6-point socket and that will fit to take the nut on and off. If you need...

Everyone's right on the light kit parts and the diagram shows that. US Army Tank & Automotive Command drawing 19207-12301023 titled KIT, MINI LIGHTING drawn in 1984 by AM General lists all the parts in the kit. It shows drawing part number 19207-12301024 titled INSTALLATION INSTRUCTIONS for...

Does anybody have/can you post the drawing that has the instructions on mounting the Mni Light kit on the M35A2? This mounts the extra amber side lights on the front composite light and adds a red side marker light to each rear side of the cargo bed.

Can anyone provide the M35A2 mini light kit installation instructions?