• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. F

    allison error 2123 Throttle position sensor

    New ecu and all new solanoids/sensors same error 4413 and 3323 pulling wireing harness now Anyone need an ECU I now have an extra
  2. F

    any luck on door parts

    still looking for an actuator on the driver side its stamped with TAGA on it. i have the part number from the TM but haven't had any luck finding one. Any ideas or help would be great PN 12417475 (driver I think) 12417476 (passenger I think) i only need the driver one
  3. F

    New M1078 owner

    also check you throttle position sensor my 95 was doing similar things. if you want to see the trans errors 1: turn on main power (do not start ) 2: push the up an down arrow on the shift pad (you should see the display change to d1 fallowed buy numbers ) 3: push and hold the mode button you...
  4. F

    new from NC

    Its a South vs North thing my part of Chapel Hill is a bunch of hippies/yuppies his part is all down home boys that love BBQ and moonshine
  5. F

    new from NC

    welcome from the other Chapel Hill not Chatham county
  6. F

    valve body removal question

    i have a bad solenoid so i have to pull the oil pan and valve body. has anyone done this and if so did you have to pull the yoke off the front of the transfer case so it would clear ?
  7. F

    allison error 2123 Throttle position sensor

    2123=Throttle position sensor, failed high I have done the adjustment and still no go is there a way to rebuild the sensor? I am also getting a 4413= Short-to-ground, B solenoid circuit witch is inside the trans so i will find someone to fix that one I don't want to crack the trans open.
  8. F

    m1078 door handle cutout dimensions

    i need the door handle cutout dimensions i am at a yard looking at some Kenworth door handles as a solution but i lost my paper with dimensions.
  9. F

    just picked up a m1078

    you will not get serivice records unless you have a buddy on post that can get access to the records.
  10. F

    just picked up a m1078

    I an going to need door handles and driver side door internals (catch & latch) any ideas on a source or an after market that will fit
  11. F

    new from NC

    Chapel Hill
  12. F

    just picked up a m1078

    Just got a 1078 from Georgia and it has 2 antenna mounts and a load of radio cable. I will get pics up later this week after I unbolt the brackets. PS: To the guys that picked up the van today at Fort Stewart you have to tell me if it made the drive, ok?
  13. F

    FMTV starter issues

    solved my intermittent start problem under the passenger side kick panel is a Alison relay box I traced my short to one pin in the connector to that box i used a needle to bend all the female ports a bit tighter the one pin i found the fault in had evidence of arcing so it could cause an...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks