Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I've been using my MEP002A with my Hobart 175A mig welder for a couple of years. Never had any issues, 175A setting puts the MEP002A @ 80-90%
I would have someone watch the "% of load" gauge just to see how far you can turn the welder up to.
HMFG
Hi,
Check with a guy on ebay EQUIPMENTPARTSSALES
I haven't used him, but somebody on SS posted about head gaskets & it looks like he got a bunch of MEP 002 & MEP 003 parts. It might be worth a try to email him.
HMFG
Rick,
The trailer has CARC paint, rain water pooled in between the bows on the top. Top was covered with thick black mold, sides had green mold! The trailers were parked less than 6 inches apart. I think the lack of direct sunlight was a factor in the green mold. The green mold went away on it's...
GL fork lifted my MEP002A into the bed of my 2500 P/U.
I picked it up with gantry crane and drove truck out from under it, then backed M101A2 under it and set it in the trailer.
The second MEP002A recovery I bolted casters to the bottom, set it on some plywood & rolled it into the garage out...
Hi,
I'm not a electrician, but as a general rule, the hot side of a electrical connections is female. That way you can't touch the exposed & energized metal prongs of a plug.
Check with any surplus or warehouse sales places in your area, keep a eye on ebay & Craigslist. Last year I bought a...
Hi,
That is a generator inlet box, you wouldn't want to use that. You would want the female version of that. You want the receptacle that matches your welder plug.
HMFG
I have been using a Hubbell 50 amp Spyder Box (temporary power box) & the 100' 50 AMP twistloc cable.
You shouldn't have any problems wiring a receptacle to the gen, it has 1 inch split bolts.
My 175 amp Hobart mig welder puts the load meter @ 90% on my MEP002A
You can get a NEW military 3...
Hi,
I have bought surplus parts on Ebay from a guy in Texas. His Ebay name is beltfed34
I have been very happy with the things I have gotten from him. He's got several different handles on there now.
What happened to yours?
HMFG
I'm 0 for 3 on my generators running without repairs.
1st MEP002A 1600 Hrs on it. Had new engine, gen head & fuel pumps. No batteries, no fluids & all the filter housings empty. It had a bad injection pump right out of the box. I installed a reman IP & it runs & generates fine.
2nd MEP002A...
Hi,
Ive had 2 successful payments with Paypal, then a boat load of failures!
On all the failures I would pick the PP option at the time of placing the bid and it would mess up right there. I'd use a CC on file and the bid would go right through.
HMFG
Hi guys,
I've been watching this thread off & on. I figure for what it's worth, I might as well add my 2 cents.
I bought a MEP002A, 1600 Hrs on the clock, It had a new engine/ generator assembly & fuel pumps installed prior to the GL auction. The new engine didn't run & it had never run, no...
Hi,
Two of my trailers have a pad eye welded back on. Grind everything down to clean metal, reassemble and weld it back on. I broke one putting it back on after drilling the hole a little bigger to make it easier to get the pin back in. The other one welded on is a previous military repair. I...
Hi,
With my solargizer disconnected from the batteries, I can watch the voltage pulse up & down on my DVOM. I can shine a strong shop light on it and see it work.
Hi,
I'm going to combine my M116A3 & M105A2 trailers and hope to get the best of both worlds. My M101A2 is a handy trailer except the 45" between the fenders & the low roof line , this makes putting two pallets in it a real hassle.
Here's my game plan:
Use the running gear & brakes from the...
I have a 2 ton gantry crane that I normally use for loading & unloading things. It is easier to just pick it up and drive the trailer out from under it. Both my MEP002's hang pretty close to level.
Hi,
Isaac-1 is on the money on the tying off to another vehicle. If your dealing with the M101 series trailers the front of the bed bends pretty easy!
I had 3 M101A1's triple stacked like dominoes on a 20' deck over trailer. I had the bright idea I would hook a come-along to the lip on the bed...
I used some old 6" plate casters. I drilled and tapped some 3/8 plates I had too match the caster pattern & one hole in the center. I put a piece of all-thread in the middle hole and welded it in. I just used what I had on hand.
If you can find a heavy duty set of stem casters, that would be...
I'd say look for broken or missing parts. The pintle ring should NOT move easily. When you look up into the underside of the coupler you should see a shock, above that a big coil spring. If you need to tow the trailer you can put a bolt & nut throught the coupler to lock out the brakes in a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!