• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 319cssb

    front driveshaft boot?

    The 20p shows a boot on the front driveshaft , I don't see it on my truck. When I googled photo's of the front driveshaft I don't see a boot , either. Am I missing something here?
  2. 319cssb

    CUCV M1008 - RunAway Starter

    The first thing i do when i get a cucv is to get rid of the starter relay. It has a bad design flaw, where the contactor is not flush with the pad and wll arch with each use. I buy my relay from napa, get some heat shrink ring terminals and some liquid electrical tape to coat the terminals when...
  3. 319cssb

    wiring help MEP 004a

    I saw that and want to hook it back up. Won't use it, just for having it the way it's supposed to be.
  4. 319cssb

    wiring help MEP 004a

    The hold down looks a bit like the vacuum pump hold down on a cucv. I was wondering why mine is all loose. I will definetely need this part. Yes there is a fuel tank in the bottom of the set. I cleaned the outside of it. Looks decent ... looks like aluminum? the oil filter housing has a hose...
  5. 319cssb

    wiring help MEP 004a

    The two wires are not labeled I can't find anything it could be connected to. So I will probably put shrink wrap on the ends and tie the wires up somewhere. Not sure what these halfway sticking out bolts are all about, but that doesn't look like it is supposed to be this way. The fuel line in...
  6. 319cssb

    wiring help MEP 004a

  7. 319cssb

    wiring help MEP 004a

  8. 319cssb

    wiring help MEP 004a

    Im going to patch the wires for now, but i'll be on the lookout for that piece of harness.
  9. 319cssb

    wiring help MEP 004a

    Here is the situation, some rodent chewed on a few wires
  10. 319cssb

    wiring help MEP 004a

    I PM'ed you, Guyfang
  11. 319cssb

    wiring help MEP 004a

    I need to find this harness.
  12. 319cssb

    M1009 front hub gets Warm

    So is it getting hot or is it getting warm? You're conflicting in your own post. How about getting a IR thermometer from harbor freight and come back with measurements from both hubs after a drive.
  13. 319cssb

    m1028 duallies -what were they used for

    I may post pictures, when I feel the truck is ready for it. Thank you for your patience
  14. 319cssb

    Just a bit excited

    A welcome to you and happy birthday. The nhc250 is a neat engine although there are a few things to look out for.
  15. 319cssb

    m1028 duallies -what were they used for

    No, Sir it's 84k___. There is a data plate. About what JCSE does https://youtu.be/w3_ERXD6sLs Basically they are deployed very early into a campaign and set up communications. So my truck was a very early Desert Shield veteran.
  16. 319cssb

    m1028 duallies -what were they used for

    I posted two pictures of the bumper, besides I am not selling it. So I don't know what it has to do with the question raised in this thread, which was answered anyway. Can someone close this thread? It is turning vacuous.
  17. 319cssb

    m1028 duallies -what were they used for

    ???
  18. 319cssb

    m1028 duallies -what were they used for

    M1078Man did you see my recent posts? The truck was used in desert shield by JCSE
  19. 319cssb

    m1028 duallies -what were they used for

    In either event, its good enough for me and maybe good enough for you, too.
  20. 319cssb

    m1028 duallies -what were they used for

    Thanks for the comment, tinstar. That detail almost slipped me. But then again I didnt say thats the one. Its only what I heard from a service member.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks