• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    M1078 100amp alternator charging issue

    Having found the C E niehoff troubleshooting guide on line I see that a flashing red means over current. Im thinking Im thinking Igot something wired wrong where the polarity protector was. I think I got some 24 going to the 12
  2. S

    M1078 100amp alternator charging issue

    I start out with green lights and 28-29v/14-15v and after a few minuets running my gauge starts dipping and I start getting amber on 24 and red on 12 with24-25 and 12.6v. If I disconnect and reconnect power to alt I get power for a few seconds. Also I don't have a polarity protector.batterys...
  3. S

    M1078 100amp alternator charging issue

    just getting to know my alternator I had it working (green lights wig Wagin).Ten minuets later I got red and amber wig wag volt meter reading 24.3
  4. S

    ECO Hubs Who needs 3:07 gears?

    Verry cool. milage?
  5. S

    Lmtv m1078 questions.

    I like the Idea of a manual control
  6. S

    Lmtv m1078 questions.

    no CTIS controller I have seen a few around on eBay. Used ones look pretty beat up. What is the life expectancy on these things?
  7. S

    Lmtv m1078 questions.

    looks like I'm missing the flasher and the CTIS pressure control unit I got 3 air lines 3 different sizes. My VIM has an aluminum housing and it looks like I got a fan solenoid in the upper right ....maybe
  8. S

    Lmtv m1078 questions.

  9. S

    Lmtv m1078 questions.

    my 1078 is a 96 the power panel is black ,there is a module there with 3 plugs in it. A blue, black and grey maybe the VIM? I got 3 air lines and a bunch of plug that look like they were plugged into something at one point. I'll try to post a picture
  10. S

    Lmtv m1078 questions.

    I got a 1078 and its missing a few parts one of which is a module under the dash passenger side I'm thinking its antilock braking?
  11. S

    n.j. area yards

    I will key the mic twice I"m in north Jersey and my LMTV does not run
  12. S

    need transport

    14 spare tire kits fromDoyle CA 96109 to. Washington NJ 07882 75"x70"x80" 1400lbs also willing to sell or trade
  13. S

    M1078 (6) 24F Battery wiring.

    yea I gotta do the same thing and I am in need of a reverse polarity battery isolator
  14. S

    shop that is reasonable? im in nj

    A&S HYDRAULICS IN WASHINGTON WARREN COUNTY
  15. S

    Eaton CTIS PCU rebuild

    like
  16. S

    M1078 (6) 24F Battery wiring.

    I am just getting started on my 1087 and its missing its 100amp reverse polarity relay. are these problematic?
  17. S

    vehicle damaged while being loaded

    My LMTV was damaged at the Butner yard. No-one is accepting any responsibility. There is damage in the back which looks like it was done by a forklift and gov planet said they don't move vehicles with forklifts. damage to the front happened when the truck fell off the loading dock. gov planet...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks