Search results

Hi Guys, Thank you for all your responses..........We now have a couple of leads and a good direction of fixing this problem............ Thank You Steel Soldiers and Best Wishes, C'dub

Hey Guys, Looking for a take out (best condition as possible) A2 deuce T-case in the New Jersey Area. Kinda need this in a hurry please............ Thanks in Advance, C'dub

:ditto:

Mike, I tell ya right now...........YOUR not going to like the prices of the headsets........Hahahahaha seya, C'dub

There was just one sold on Ebay that was complete and NEW and sold for a very good price........... C'dub

the vic-3 is a complete digital system and don't mix headsets with the vic-1 or the vic3. The SINCGARS can interface with the VIC-1 and then they were replaced with the VIC-3. I'm not sure how the well the VIC-3 will interface with the VRC-12 series radios. The VIC-3 was designed for use with...

This is the meeting point for our group as we convoy down to the Aberdeen show meeting up with others along the way. http://www.eastcoastconvoy.com/routes/redmain.html Don't be confused by the dates......they have not been up-dated as usual but the route and times should remain the same...

Hi Rory, Wow.......nice save of the M49C. I'm sure Sarge will do a great paint job on her. Sorry to hear about the tow bar thing......and the tire.......you guys got lucky for sure. Try to make sure the next time out that all the tow bar pins are changed to this type and I even carry some...

No, I don't believe that information is correct. Most of the ones I've ever used or have seen seam to be a standard cage bolt for this one purpose. seya, C'dub

Hi, You will need four of the releasing tools for both rear axles(one per wheel). They may be set in the docking holder on each side of the air brake chamers if you take a look. Most trucks parts stores will have them in stock. Cheers, C'dub

try a search on " Combat Wheels " which should turn up some good results.... Here is one I started when I was changing some tires http://www.steelsoldiers.com/showthread.php?t=13459&highlight=combat+wheels seya, C'dub

If my memory is correct........... A1's.....smaller studs the wheel slips over the side of the O ring and the A2's.....the larger studs the wheel sits on top of the O ring which makes them look like a triangle when removed. I think the only difference between the O rings is the...

Sorry, The M939 series and the M809 series use different hard tops. seya, C'dub

Coool Beans..........!!! C'dub

Jezz, I almost didn’t recognize John with out his Cigar………Haha… That sure is a truck load of trailers.......!! Cheers, C'dub

Great progress on the wrecker Jason........Just a suggestion though when you have the time...... Try to make sure you blow out the air wet tank the best you can. I charged up the air system from the rear emergency glad handle and removed one of the fittings on the wet tank and I could believe...

Yes, They came with either start.........As a matter of fact all of the M939 series trucks had either start as standard equipment. Cheers, C'dub

I see a Fording kit and cut off Paper Clips on the front bumper............. C'dub

Weather it's a CUCV, HMMWV, five ton what ever.........You will see differences. Even when trying to stick to the TB for the pattern. I went through the same thing as your going through right now before I started painting the Woodland Pattern on my five ton. Even though most of the five tons I...

Roger that............ C'dub KC2UCZ