Search results

Nice job putting it all together by yourself! It does go up easier when you put the fabric on before the eave gets stood up. Having 2 skid steers also makes short work of it lol

Sorry for the late reply. I'll dm you

Sorry, I know it's in my name, but I just deal with Drash tents. I don't know anything about parts for the generator ECU trailers

Sorry I don't have those parts

Looks a bit different then a hunter camfire heater but they're still 3 pins. If you're good with wires figure out which one is ground and which 2 you cross to turn on the heater. The thermostats are just on-off switches. The circuit should be 24v like other heaters but check it. I have a bunch...

What does the connector look like?

I have a centrifuge to process my WMO and it does a great job pulling all the crud out. I would not put uncleaned oil in anything, having found that out after clogging the tip in my hunter camfire heater and flooded it with oil. For a heater you can run 100% WMO, no gas is needed. For engines...

I have maybe 20+ Nordic air ECUs and none of them have been drilled like yours have. Most have been drained and some had their service ports left open. I just vac them out and fill, and they function 75% of the time. Meaning 1 of 4 have some sort of issue that's not worth fixing. Mine are r22...

Are you going to sew it yourself?

Not sure if you wanted to bother with your project anymore, but a Nordic air ECU would be easy to install as a replacement

If you need parts to complete your Drash MX shelter, let me know. Looks like you have the end caps so it may be complete

I also use a 40 gallon spot sprayer from tractor supply with a bleach sprayer 12v pump from northern tool. This coupled up with a pressure washer makes short work of even the worst mold

The material is vinyl coated polyester, or called PVC fabric (Poly Vinyl Chloride). Whenever I wash tents, and they come black with mold sometimes, I start out with a 20% bleach solution and go up to 50% for stubborn areas. At 50% it can start taking the color out of the vinyl, especially on...

I know my DRASH HP-8 generator/hvac trailer with tent had a sticker price of $250,000 dollars on it

Perfect! Thanks for that, looks like the ridge pole needs to be 9 feet

That's what I thought. Were there any poles for the eve?

I could have a reproduction, but I can't tell. It looks like it needs 2 vertical poles and a ridge pole spanning the very top of the tent

Yes it appears to be the same model as the pitched tent I posted. Oddly I couldn't find anything stenciled on the canvas. You're right about the poles, I got a GP small hexagon in the mix, but this tent doesn't use them

I've purchased another lot of tents and came across this oldie. I'm having a hard time finding info and I do not think I have the correct poles. The closest thing I can find are pictures when I look up ww2 tents. Any info would be appreciated as I would like to refurbish this old tent

Could the transmission tcm be programmed to bring back 1st gear? It would give you some much needed low end