Search results

Well I think that I found some help in getting my M923A1 road worthy it has some tire cracks on the sidewalls so we're replacing them and I have an air leak that I have t figure out I have pressure the tanks and she holds pressure but m buzzers going of even though she is holding. I am going to...

Ok so I finally found the air leak and it is out of the air drain valve so I took it off and of course it is from the wet tank so it is pretty rusty up inside the union so I have ordered a package of ten to possibly change them all out. I will have some left over. I went around town trying to...

That is good to know yeah I am trying to get my cdl so I can actually drive the darn thing for the test, but I know that they are not going to let me drive it with that thing on....thought about just taking out the light, LOL! whenever you get back to it let me know what tm your in and what page...

any ideas on trouble shooting mine has been painted over so no stats on it??? the low air module of coarse???

Nice work! Did you notice any difference driving it with the new filter??? You know better horsepower and such??? I have been thinking about changing mine over also to where it is using all of the filter instead of just the end. What a stupid design Donaldson did there!

Ok So I replaced a headlight with the light assembly harness that I changed out to a H3 getting her ready for some newer led lights a little further down the road. However I have a problem with my air system light not going off after my primary and secondary tanks have been filled with at least...

On the air powered wipers....I wander how many people throw these out??? If you have taken it apart there is really not much to them. I recently had my driver side getting air without any leaks. i could see that the air was going to it but me and my brother decided to take it off the frame and...

Well I found the problem and it happened to be the air dryer. So I bought a major kit for the air dryer took it off the truck, broke it all the way down, cleaned it out with carb cleaner some brushes and the good ole fashioned q-tip, and put her all back together again! I had never noticed the...

Ok so I have an M923 and I have gone through the tech manual. My gauges won't build air pressure at all and I have not found any leaks. The signal air line from the governor has not air running through it but the compressor is sucking air in from the manifold but possibly may not be pulling in...

:sad: Man I was hoping to actually do this! So when you say axle and hub I know that the hubs are different but what is different about the axles???

I stand corrected than thank you also for the insight. My brother and I were wondering that because we had never taken any of the batteries out of the battery compartment and when I got to Napa where he is parts manager, I showed him the batteries to test and he and I were like wait a minute...

Actually your wrong on the numbers to be correct the 6TL has 725 ca so it would be 2900 ca total to help everyone out! I know because I read the label and changed out 4 for 2 12v batteries instead!

I just got the balls and drove it home from Ft Riley to OK and man did me and my brother get lucky!!!LOL!

I have an M923 also and want more power out of it also. I am going to get to this part at some point and be all in! Right now I am doing simple stuff like simplifying the batteries to 2!LOL!

I am actually wanting to put a CTIS on my M923 but it is not the A2 is that even possible and if it is is there anyone that has any information on how I can even do it??? I will take any pieces off of anybody that wants to part ways with theirs too !!!

I just bought that same battery and just to let everyone know the stats on that Napa 7271 battery is 1400cca and the 1720@ above 32 degrees, but all that matters is that he made it work and that is what I am doing tonight towards my own M923 I have one battery with a bad cell and two that were...

Boy at least someone is making good use out of their trailer! That is pretty nice on the inside what kind of work do you do out of yours, is it business or just hobby?

I am bidding on a 15kilowatt generator out of Ft Riley that is on a trailer and it looks like it has the J4 plug that will plug right into the trailer. Of course I don't know what the heck I am going to do with 15 kilos of electricity besides light up my community, LOL! but hey if it is what...

Well I think that I am about to fix the single phase situation and get a better generator for it that is 3 phase and the correct voltage and see if it makes a difference so I can run it all like I should be able to. There is a generator up for grabs that is 15 kilos on gov liquidation that I am...

Hey Kurt, Well man I got those walls unfolded and set up finally on it thanks and am currently trying to figure out my lighting situation, wow what an ordeal so I have power to receptacles but no lights I took off the overhead wire housing to check for any problems and the wiring looks fine...