Search results

Front right zone, the one of 4 with less work to done... Started to put the patches... The corner was put on the right position, because it was shrink by some hit in the past... And the patch in the corner, in the side of the new panel... Missing some metal... Bad measures made by me...

Looking like a car again... Well... more or less... :mrgreen:

And with the 3 main points welded, I started to adjust the exterior panel... Welding to not desajust the measures... By the time past, they were more...

Turn to the rear... And started to weld the patch that I put before...

The fenders were used to take the right measures and positions for the nuts inside of the new part, that come without them... The two parts allready welded... The side one with the interior one... Corner done...

To put the side panels on the right position, I used this pieces...

Front corner with the patch started. Some weld spots... To not loose the right position on the B pilar. Also on the back...

Ok now...

After, on the front pilar, I need to remove the rest of the old metal... Adjusting... Lost the times that I put it in and take it out... measuring... measuring again until the fabric measures are allright... All the holes for the weldings done...

Need to remove the fabric primary to weld the suport for the gun suport: Before it was cleaned and zinc painted... Welded... Still need to do the same on the other side...

At the back, on the C pilar, the new part on place allready: The old one on the left...

More empty now... Some off the rust allready removed...

After that I started to take off the rest of the old metal from the B pilar. The famous couple inside: The rust caused by the foam...

More work on the car... That's a reinforcement panel for inside of the side panels that I need the reproduce... This one dont come on the new panels...

To prevent the rust, I give some provisory spray zinc... All of the rest of the zone also... No filler... Just the weld grided... Will need to remove all of this zinc and the rest of the old paint to put the other zinc with two componentes, the filler, the HS primer, the stone...

The reinforcement zone box allmost done...

The inside view... Still need to cean some places...

The patch were the rear bumper will be attached... Allmost all the grid done... With the curve, as the same on the other side... Perfect... :D

Rear right corner... All day on this... But was a nice work... :D

Last saturday work... Zinc paint on a place that will be closed for good...