Search results

The batteries are going to be located in the external cargo box on the passenger side. I have seen some postings and (well) made a better box. Remove the box and the mounting plate. Using a cut off grinder cut the cover off the box completely. I will get some better pictures of the engineering...

M923A2 Battery Relocation Project: This week I have been having some problems with my batteries not charging. I disconnected each of them and charged them manually. Found one of the original batteries was shot and not taking a charge. This caused the whole system to not charge properly. (My...

...well --- there's the problem --- chalk it up to a case of LMC (Low Marble Count) - been testing vic's and control boxes on the bench with a CX4723 cable all this time. Didn't dawn on me to switch the cable to a CX13292 when testing the 671. Seems to work much better when ya use the right...

Here is what I have – (1) VIC-1 – (2) 4’ Cables - (2) Control Boxes – (2) Head Sets on the bench. Hook up the VIC – power on, no problem everything works fine. Power Off - Replace one of the control boxes with a 671 (No Mic) and power on. With the On/OFF switch of the 671 in the OFF position you...

I have a working VIC on the bench yet with a single control box and headset. I will try a couple 671 with a 4' cable I know works this afternoon. Will let everyone know what happens... Thank you...

I used a CX13292 and came out of the top of VIC port to the 671 - powered up - the light came on - the speaker was very quiet even with the volume knob turned up and when I keyed the mic the power light dimmed. Have a couple of these from trucks we just received. It just seems like the 671 does...

I understand how the VIC-1 AM-1780 and its components work. No Problem - But, lately I have been receiving vehicles with left over parts like the LS-671/VRC in them. I connected one of them to a VIC-1 and it really didn't seem to like that idea. What type of system are these newer plastic...

Didn't see the part about a generic O-ring in your message. Will take that critter apart and try just replacing the piston O-rings before getting a whole kit. Thank you! -0------- ignore below -------o- The valve body I assume your talking about is the PCU (device under the dash) behind the...

Sometime finding the right parts to put these big boy toys back together is a bit like being in a cartoon - :carnac:

Having a problem with a CTIS (M923A2). Start the truck up - dump the air in the tires to "run flat" - this works fine. Go to "Sand" mode and listen to the PCU pulse to fill all tires. This will fill to sand mode pressure no problem. Next go to X-C mode and again listen as the PCU starting...

Thank you...

Thanks - I will be going there this year. Looking for more VIC parts...

Hello, been reading allot about deuces on this site now for a while. Figure its time to step up and introduce my self. From Northeast Wisconsin. Own a deuce and now a 5 ton. The deuce is my baby been restoring it now for a year and really enjoy driving it and going to car shows with it. Does...