Search results

So, I take it as, there really is no OFF. It just sits at IDLE. umm, I might not be using it for a while, since its winter. So the best way is to disconnect all batteries if I won't use it for another 4 months. I have it running at Freeze now. A nice -24.7 c and holding. 24 hours now.

i gathered the pertinent information ************************ CSafe Global https://csafeglobal.com/specialty-solutions/mobile-refrigeration/ AcuTemp AX56L mobile refrigerator/freezer Model HMC-MIL-1A (or Hemacool) Solid State Refrigerator-freezer NSN 4110-01-629-9593 (or AcuTemp AX56L) Older...

I joined the club. I picked a unit up the other day. Never issued, Never run. Not Freon evacuated. Model HMC-MIL-1A (or Hemacool) Solid State Refrigerator-freezer NSN 4110-01-629-9593 I like the mods for the lid.

The AMMPS MEP-1050 comes with 2 Optima Red 34/78 batteries.

Don't over think it. Charge your batteries.

Since they all use the same fuel cap. Someone figured out for the MEP-803A a while back. 803 fuel filler rubber gasket | SteelSoldiers

GovPlanet Chambersburg, PA There are 2 locations The warehouse requires an appointment. Inbound/Outbound hours of operation- 0800-1400 Seems like it takes forever. Warehouse 2801 WCN Drive, Chambersburg, PA 17202 Make appointment, release paperwork, driver check-in first, then go to bay...

Getting lost too :cool: To the top we go

It's getting lost. :cool: To the Top we go.

Tape = Electrical type tape on each battery connector individually. You don't need them bouncing around touching stuff inside. The slave receptacle on each MEP is a direct 24v input and output. Actually, all military hardware that has engines, has a 24v slave port. On trucks, lots will have the...

Howdy, Start in this thread. 2nd post has quick links for some info 3rd post has links to the manuals. MEP-802A MEP-803A Filters and Parts | SteelSoldiers

Howdy, This company makes slave power interconnects. GEISLV-ASlave Military Connector - Graywacke

NOTE: Tape up the battery connectors inside the genset.

Do you know how to start a MEP generator?

To answer the one question so you understand. The Metal strap is the bonding strap. Connected or Disconnected. That all revolves around the grounding situation of what you are powering. Has nothing to do with wether its 120, 120/240/ or 3 phase. Future Notes: How was the Honda Generator...

Start this thread here, 2nd post has quick links of interest, 3rd post has links to manuals. MEP-802A MEP-803A Filters and Parts | SteelSoldiers

Since no one has chimed in about it. Stop cranking, stop running your generator until you get the fuse mod installed. Just stop. No turning it over, no testing, no nothing.

Have fully charged batteries. After changing both filters, cup cartridge filter, and the spin-on water fuel filter, you will turn S-1 to "Prime & Run" for a long time. It could be 5 minutes. Any excess fuel returns back to the tank thru the fuel return lines. The fuel return lines might need...

MEP-8xx Fuel/Water spin-on filter | SteelSoldiers

A note to others on the forum. It seems the fuel/water filter was put on dry, and overly tight. Usually, you destroy the filter taking it off. On 1 unit I had to remove the entire base and filter. Placed on the bench vice to finally get the filter off. You could also remove the base, and work...